1711 DE - Motion detector JUNG - Free user manual and instructions
Find the device manual for free 1711 DE JUNG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motion Detector |
| Brand | JUNG |
| Model | 1711 DE |
| Detection Technology | Passive Infrared (PIR) |
| Detection Angle | 180° |
| Detection Range | Up to 12 meters (adjustable) |
| Power Supply | 230V AC, 50Hz |
| Power Consumption | < 0.5W standby |
| Load Capacity | Max 1000W incandescent, 500W LED |
| Time Setting | Adjustable from 10 seconds to 15 minutes |
| Twilight Setting | Adjustable lux threshold |
| Mounting | Wall or ceiling mount |
| Dimensions (WxHxD) | 85 x 85 x 50 mm |
| Weight | 150 g |
| Ingress Protection | IP44 |
| Operating Temperature | -20°C to +40°C |
| Warranty | 2 years |
| Certifications | CE, RoHS |
| Maintenance | Wipe with dry cloth; avoid solvents |
| Safety | Disconnect power before installation |
| Spare Parts | Not available; unit is sealed |
Frequently Asked Questions - 1711 DE JUNG
How does the motion detector work?
The JUNG 1711 DE uses passive infrared (PIR) technology to detect heat movement. When a person or object moves within its detection zone, the sensor triggers the connected load.
What is the detection range and angle?
The detector has a 180° detection angle and an adjustable range of up to 12 meters. You can fine-tune the range via a potentiometer.
Can I use this detector outdoors?
Yes, it is rated IP44, making it suitable for sheltered outdoor areas. Avoid direct exposure to rain or splashing water.
How do I adjust the time delay?
Turn the time setting knob (marked 'Time') to adjust from 10 seconds to 15 minutes. After motion stops, the light stays on for the set duration.
How do I set the twilight threshold?
Use the lux control knob (marked 'Lux') to set the ambient light level at which the detector activates. Turn clockwise to increase sensitivity (darker conditions).
What should I do if I experience false alarms?
Check for heat sources like vents or animals in the detection zone. Reduce the detection range or adjust the mounting angle. Also ensure the detector is clean and unobstructed.
Can I connect multiple lights or a high load?
The maximum load is 1000W incandescent or 500W LED. For higher loads, use a contactor. Do not exceed these ratings.
Is it compatible with LED bulbs?
Yes, it is designed for LED bulbs up to 500W total. Use LED-compatible dimmers if dimming is required.
How do I install the detector?
Mount it on a wall or ceiling at a height of 2–2.5 meters. Connect the mains supply (L, N, and load) according to the wiring diagram in the manual. Always disconnect power before installation.
What is the warranty period?
The JUNG 1711 DE comes with a 2-year warranty against manufacturing defects. Keep your purchase receipt for claims.
User questions about 1711 DE JUNG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motion detector in PDF format for free! Find your manual 1711 DE - JUNG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 1711 DE by JUNG.
USER MANUAL 1711 DE JUNG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JUNG
Model : 1711 DE
Category : Motion detector