AL17182 - Motion detector JUNG - Free user manual and instructions
Find the device manual for free AL17182 JUNG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motion Detector |
| Brand | JUNG |
| Model | AL17182 |
| Mounting Type | Ceiling surface-mounted |
| Detection Angle | 360 degrees |
| Detection Range | Up to 8 meters (adjustable) |
| Power Supply | 230 V AC, 50 Hz |
| Maximum Load | 200 W LED / 1000 W incandescent |
| Connection Type | 4-wire with neutral conductor |
| Time Delay Setting | Approx. 5 seconds to 15 minutes |
| Twilight Control | Adjustable light threshold |
| Ambient Temperature | -20°C to +40°C |
| Protection Rating | IP20 (indoor use) |
| Dimensions (W × H × D) | 105 × 65 × 35 mm |
| Weight | Approx. 0.1 kg |
| Installation | Professional installation recommended |
| Manual Override | Yes, via switch |
| Detection Sensitivity | Adjustable |
| Care & Cleaning | Wipe with dry cloth; avoid solvents |
| Safety | Disconnect power before installation |
| Spare Parts & Repairability | Professional repair; sensor units replaceable |
| Certifications | CE marked |
Frequently Asked Questions - AL17182 JUNG
What is the detection range and angle of the JUNG AL17182?
The JUNG AL17182 features a 360-degree detection angle with an adjustable range of up to 8 meters, suitable for ceiling mounting.
What power supply does the AL17182 require?
It operates on a standard 230 V AC, 50 Hz power supply and uses a 4-wire connection including a neutral conductor.
Can the detection range be adjusted?
Yes, the detection range is adjustable, allowing you to customize the coverage area according to your needs.
How do I set the time delay for the light to stay on?
The time delay can be adjusted from approximately 5 seconds to 15 minutes using the control on the unit.
Is the AL17182 suitable for outdoor use?
No, this model has an IP20 rating, making it suitable only for indoor installations where it is protected from moisture and dust.
What types of lamps can be connected to the motion detector?
The detector supports LED lamps up to 200 W and incandescent or halogen lamps up to 1000 W. Always stay within the maximum rated load.
Does the AL17182 have a twilight sensor?
Yes, it is equipped with an adjustable twilight control, so you can set the light threshold at which the detector activates.
Can I override the motion detection manually?
The unit supports manual override via a standard wall switch, allowing you to turn the light on or off permanently when needed.
How should I clean and maintain the motion detector?
Clean the surface with a dry, soft cloth. Avoid using solvents or abrasive cleaners that could damage the plastic housing.
What safety precautions should I take before installation?
Always disconnect the power supply before installing or servicing the device. Installation should be carried out by a qualified electrician to comply with local regulations.
User questions about AL17182 JUNG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motion detector in PDF format for free! Find your manual AL17182 - JUNG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AL17182 by JUNG.
USER MANUAL AL17182 JUNG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JUNG
Model : AL17182
Category : Motion detector