LS17180WU - Motion detector JUNG - Free user manual and instructions
Find the device manual for free LS17180WU JUNG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motion detector (PIR) |
| Brand | JUNG |
| Model | LS17180WU |
| Mounting Type | Wall-mounted |
| Detection Angle | 180° |
| Detection Range | Up to 12 m |
| Sensor Technology | Passive infrared (PIR) |
| Power Supply | 230 V AC, 50 Hz |
| Max Switching Load | 2300 W (ohmic), 400 W (LED) |
| Twilight Setting | 5–1000 lux, adjustable |
| Time Setting | 10 s – 15 min, adjustable |
| Degree of Protection | IP20 (indoor use) |
| Operating Temperature | -20°C to +45°C |
| Dimensions (H × W × D) | 100 × 80 × 68 mm |
| Weight | 120 g |
| Colour | White |
| Material | High-grade plastic |
| Certifications | CE, VDE |
| Warranty | 2 years |
Frequently Asked Questions - LS17180WU JUNG
What is the difference between PIR and other motion sensors?
The JUNG LS17180WU uses passive infrared (PIR) technology, which detects heat radiation emitted by people and animals. It is ideal for indoor use and provides a reliable response to movement while being energy-efficient.
How do I mount the JUNG LS17180WU?
Mount the detector on a wall at a height of about 2 to 2.5 meters. Ensure that the detection area is not blocked by furniture or curtains. Use the included screws to fix the device. The manual contains a detailed mounting diagram.
Can I use the LS17180WU outside?
The IP20 protection rating indicates that this model is designed for indoor use only. If you need an outdoor detector, choose a device with at least IP44 protection.
How do I adjust the detection range?
The detection range can be set by turning the range potentiometer on the device. You can also mask individual lenses with the enclosed stickers to reduce the detection area.
What is the twilight switch used for?
The twilight switch determines the ambient light threshold at which the detector activates the connected lighting. Set it to the desired lux level so the light only turns on when it gets dark enough.
How can I set the time delay?
The time delay controls how long the light stays on after the detection of movement. Rotate the time knob to choose a duration between 10 seconds and 15 minutes.
The light stays on permanently. What should I do?
This often happens if the time setting is too high or the detector has locked on to a heat source. Check that the time setting is not at maximum and that the detector is not facing a radiator or direct sunlight. A short circuit can also cause this issue.
How do I clean the motion detector?
Use a soft, dry cloth to wipe the lens and housing. Avoid chemical cleaners, as they can damage the plastic and reduce detection reliability. Disconnect the device from power before cleaning.
Can I connect several detectors to one lamp?
Yes, you can connect multiple LS17180WU detectors in parallel (master mode). This allows the lamp to be switched on from different locations. Be sure the total load does not exceed the maximum switching capacity.
What is the maximum switching capacity of the LS17180WU?
The detector can switch up to 2300 W of ohmic load (e.g., incandescent lamps) or 400 W of LED lighting. Always respect these limits to avoid damaging the device.
User questions about LS17180WU JUNG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motion detector in PDF format for free! Find your manual LS17180WU - JUNG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LS17180WU by JUNG.
USER MANUAL LS17180WU JUNG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JUNG
Model : LS17180WU
Category : Motion detector