LED Dim-3 MKII - Variateur d'éclairage LED Artecta - Free user manual and instructions
Find the device manual for free LED Dim-3 MKII Artecta in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Dimmer Controller |
| Model | LED Dim-3 MKII |
| Brand | Artecta |
| Input Voltage | 12V DC |
| Max Load | 3A per channel |
| Number of Channels | 3 |
| Control Protocol | PWM (Pulse Width Modulation) |
| Dimensions (L x W x H) | 100 x 60 x 30 mm |
| Weight | 200 g |
| Housing Material | Aluminum with black finish |
| Cooling | Passive (natural convection) |
| Main Functions | Dimming, on/off control, DMX512 compatible |
| Cleaning | Wipe with dry cloth; disconnect power before cleaning |
| Safety | Overload protection, short-circuit protection, use with LED lamps only |
| Spare Parts | None user-serviceable; contact manufacturer |
| Repairability | Not repairable by user; seek professional service |
| General Information | Designed for indoor use; operating temperature: 0-40°C |
Frequently Asked Questions - LED Dim-3 MKII Artecta
What is the LED Dim-3 MKII used for?
It is a 3-channel LED dimmer controller for RGB or single-color LED strips.
How do I connect the dimmer to my LED strip?
Connect the 12V DC power supply to the input, and the LED strip to the output terminals (common anode for RGB). Ensure correct polarity.
Can I use this dimmer with non-LED loads?
No, it is designed specifically for LED lighting. Using it with other loads may damage the unit.
What is the maximum current per channel?
Each channel can handle up to 3 amps, so total load should not exceed 9A across all channels.
Does it support DMX control?
Yes, the LED Dim-3 MKII is DMX512 compatible, allowing integration with DMX controllers.
How do I set the DMX address?
Use the DIP switches on the unit to set the DMX address in binary. Refer to the manual for specific settings.
My LED strip is not responding; what should I check?
Check power supply voltage, wiring connections, and DMX address. Ensure the strip is common anode and input voltage matches 12V DC.
Can I use a dimmer switch (e.g., wall dimmer) with this controller?
No, the controller expects a constant 12V DC input; it should not be connected to a mains dimmer.
How do I clean the device?
Disconnect power and wipe gently with a dry, soft cloth. Do not use liquids or sprays.
What is the warranty on this product?
Typically Artecta offers a 2-year warranty. Check with your dealer for terms.
User questions about LED Dim-3 MKII Artecta
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Variateur d'éclairage LED in PDF format for free! Find your manual LED Dim-3 MKII - Artecta and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LED Dim-3 MKII by Artecta.
USER MANUAL LED Dim-3 MKII Artecta
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Artecta
Model : LED Dim-3 MKII
Category : Variateur d'éclairage LED