ADDERView RDX 5000IP - Computer Adder - Free user manual and instructions
Find the device manual for free ADDERView RDX 5000IP Adder in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP-based KVM Extender |
| Brand | Adder |
| Model | ADDERView RDX 5000IP |
| Rackmount Form Factor | 1U, 19-inch rack compatible |
| Dimensions (H x W x D) | 44 mm x 483 mm x 200 mm |
| Weight | 2.0 kg |
| Power Supply | 100-240 V AC, 50-60 Hz, external power adapter |
| Power Consumption | 15 W typical |
| Supported Video Resolutions | Up to 1920 x 1200 at 60 Hz |
| Video Interface | VGA (D-Sub 15) and DVI-I (analog/digital) |
| USB Support | USB 2.0, keyboard and mouse emulation |
| Audio Support | Stereo audio in/out (3.5 mm jacks) |
| Network Interface | 10/100/1000 Mbps Ethernet (RJ-45) |
| Extension Distance | Unlimited over IP network |
| Encryption | AES 128-bit for secure transmission |
| Operating Temperature | 0°C to 50°C |
| Maintenance | Clean with dry cloth; avoid liquids |
| Safety | CE, FCC certified; use with grounded outlet |
| Spare Parts Available | Power adapter, mounting brackets, cables |
| Repairability | Serviceable by qualified technicians only |
| Included Accessories | Power adapter, DVI cable, USB cable, audio cable, rack ears |
| Warranty | 2 years limited |
Frequently Asked Questions - ADDERView RDX 5000IP Adder
How do I connect the ADDERView RDX 5000IP to my network?
Connect the Ethernet port (RJ-45) on the rear panel to your local network using a standard Cat5e or higher cable. Ensure the network supports TCP/IP and assign an IP address via DHCP or manually through the web interface.
What video resolutions are supported?
The device supports resolutions up to 1920 x 1200 at 60 Hz with both VGA and DVI inputs. Lower resolutions are also supported.
Can I use USB peripherals like a printer or flash drive?
Yes, the device supports USB 2.0 for peripherals such as keyboards, mice, and storage devices. However, high-bandwidth devices may experience reduced performance.
How do I configure the device for remote access?
Access the built-in web interface by entering the device's IP address in a browser. From there, you can set network parameters, configure user accounts, and enable remote access features like IP-based control.
Is the connection secure?
Yes, the ADDERView RDX 5000IP uses AES 128-bit encryption for video and keyboard/mouse data transmission, ensuring secure remote control.
What is the maximum distance between the local and remote units?
Over an IP network, the distance is unlimited as long as there is network connectivity between the units. Latency depends on network quality.
Can I extend audio along with video?
Yes, the device supports stereo audio input and output via 3.5 mm jacks. Audio is transmitted alongside video over the network.
How do I update the firmware?
Download the latest firmware from the Adder support website. Upload it via the web interface under the 'Maintenance' section. Ensure the device remains powered on during the update.
What power supply does the device require?
The device uses an external power adapter that accepts 100-240 V AC, 50-60 Hz. The output is 12V DC, typically 2A.
The device is not detected on the network. What should I check?
Verify that the Ethernet cable is securely connected and the network switch port is active. Check if the device's IP address is correctly assigned (DHCP or manual). You can also use the front panel LCD to view the current IP settings.
User questions about ADDERView RDX 5000IP Adder
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Computer in PDF format for free! Find your manual ADDERView RDX 5000IP - Adder and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ADDERView RDX 5000IP by Adder.