MCINTOSH DS200 - Loudspeaker

DS200 - Loudspeaker MCINTOSH - Free user manual and instructions

Find the device manual for free DS200 MCINTOSH in PDF.

📄 24 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice MCINTOSH DS200 - page 4
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type 2-way bookshelf speaker
Driver Complement 1-inch titanium dome tweeter, 6.5-inch polypropylene cone woofer
Frequency Response 45 Hz - 20 kHz ±3 dB
Sensitivity 88 dB @ 2.83V/1m
Impedance 8 ohms (nominal)
Power Handling 150 watts RMS, 300 watts peak
Crossover Frequency 2.5 kHz
Enclosure Type Bass-reflex with rear-firing port
Dimensions (H × W × D) 15.75 × 8.5 × 12.25 inches (400 × 216 × 311 mm)
Weight 22 lbs (10 kg) each
Finish Black lacquer or walnut veneer
Warranty 5 years limited
Recommended Amplifier Power 20 - 200 watts per channel
Placement Bookshelf or stand-mount, at least 12 inches from rear wall
Input Terminals Gold-plated binding posts (bi-wire capable)
Grille Magnetic snap-on, black cloth
Cleaning Wipe with a soft, dry cloth; avoid abrasive cleaners

Frequently Asked Questions - DS200 MCINTOSH

What is the recommended amplifier power for the DS200?
The DS200 performs best with amplifiers rated between 20 and 200 watts per channel into 8 ohms. Avoid underpowering as it may cause distortion.
Can I bi-wire or bi-amp the DS200?
Yes, the binding posts are gold-plated and allow bi-wiring or bi-amping by removing the metal jumpers. Ensure amplifier channels are identical for bi-amping.
How should I position the speakers for best sound?
Place the speakers at ear height when seated, at least 12 inches from the rear wall. Angle them slightly toward the listening position for optimal imaging.
Is there a break-in period for the DS200?
Yes, allow 50-100 hours of playback at moderate volume for the suspension to loosen. The sound will mature, becoming more open and dynamic.
How do I clean the speakers?
Use a soft, dry cloth to wipe the cabinet. For grilles, gently vacuum with a brush attachment. Avoid liquids or abrasive cleaners.
What is the warranty coverage?
McIntosh provides a 5-year limited warranty covering defects in materials and workmanship. Register your product online to activate.
Can the DS200 be used as a center channel?
While designed as a stereo pair, you can use a single DS200 as a center channel if matched with similar timbre speakers from the same series.
What type of speaker wire should I use?
Use 16-12 AWG stranded copper wire. Keep lengths equal for both speakers. Banana plugs or spade connectors are recommended for secure connection.
How do I avoid damaging the speakers?
Avoid clipping by keeping amplifier volume within safe limits. Do not place near heat sources or in direct sunlight. Ensure vents (if any) are unobstructed.
Where can I find the serial number?
The serial number is on a label on the back panel. Keep it for warranty registration and service inquiries.

User questions about DS200 MCINTOSH

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Loudspeaker in PDF format for free! Find your manual DS200 - MCINTOSH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS200 by MCINTOSH.

USER MANUAL DS200 MCINTOSH

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : MCINTOSH

Model : DS200

Category : Loudspeaker