TMP 500-S NIRO - Pump EINHELL - Free user manual and instructions
Find the device manual for free TMP 500-S NIRO EINHELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Submersible pump |
| Brand | Einhell |
| Model | TMP 500-S NIRO |
| Tank material | Stainless steel (NIRO) |
| Nominal power | 500 W |
| Supply voltage | 230 V ~ 50 Hz |
| Max flow rate | Approx. 15,000 L/h |
| Max delivery head | 9 m |
| Max immersion depth | 7 m |
| Connection diameter | G 1" (male thread) |
| Max particle size | 5 mm |
| Max fluid temperature | 35 °C |
| Power cable | 10 m with plug |
| Dimensions (L x W x H) | 25 x 20 x 35 cm |
| Weight | 7.5 kg |
| Protection class | IPX8 |
| Main functions | Pumping clear or slightly dirty water, basement drainage, irrigation |
| Maintenance and cleaning | Regularly clean the strainer and check the oil seal |
| Safety | Integrated thermal protection, automatic shutdown in case of overheating |
| Spare parts and repairability | Available on the Einhell website or from authorized dealers |
Frequently Asked Questions - TMP 500-S NIRO EINHELL
What is the difference between the TMP 500-S NIRO pump and a standard model?
The NIRO model has a stainless steel tank, offering better corrosion resistance and extended service life, especially for use in clean or slightly dirty water.
Can I use this pump for dirty water (mud, sand)?
No, the maximum particle size is 5 mm. For larger particles, a model designed for heavily contaminated water is required.
How to properly install the pump?
Place the pump flat on the bottom, connect the discharge hose to the fitting, immerse the cable in water and plug it in. Ensure the pump is submerged at least 30 cm.
What to do if the pump does not start?
Check the power supply, circuit breaker tripping, and that the pump is not clogged. If the problem persists, the thermal protector may have cut off the power: let it cool for 30 minutes.
What is the maximum delivery head?
The maximum delivery head is 9 meters (under ideal conditions). Beyond that, the flow rate decreases significantly.
Can I use the pump without water?
No, dry running damages the pump. Use it only submerged, and install a float switch to prevent dry running.
How to clean the strainer?
Unplug the pump, remove the bottom of the strainer by unscrewing the screws, clean it with clean water and a soft brush, then reassemble. Perform this operation regularly to ensure flow rate.
Is the pump suitable for use in seawater?
Yes, the NIRO version (stainless steel) resists seawater corrosion. However, rinse it with fresh water after each use to prevent salt deposits.
What are the recommended accessories?
A discharge hose of appropriate diameter, a non-return valve, a quick coupling, and an adjustable float switch for automatic draining.
Where to find spare parts?
Spare parts are available on the Einhell Service website and from partner retailers. Always specify the model TMP 500-S NIRO when ordering.
User questions about TMP 500-S NIRO EINHELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pump in PDF format for free! Find your manual TMP 500-S NIRO - EINHELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TMP 500-S NIRO by EINHELL.
USER MANUAL TMP 500-S NIRO EINHELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EINHELL
Model : TMP 500-S NIRO
Category : Pump