KG340.9 - Saw KRESS - Free user manual and instructions
Find the device manual for free KG340.9 KRESS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Circular saw |
| Brand | Kress |
| Model | KG340.9 |
| Dimensions (L x W x H) | 300 x 200 x 250 mm |
| Weight | 4.5 kg |
| Power supply | 230 V / 50 Hz |
| Power consumption | 1200 W |
| Blade diameter | 190 mm |
| Max. cutting depth (at 90°) | 65 mm |
| Max. cutting depth (at 45°) | 45 mm |
| No-load speed | 5000 rpm |
| Main functions | Straight cut, bevel cut (0-45°), laser guide |
| Safety | Blade brake, transparent blade guard, double safety switch |
| Maintenance and cleaning | Clean ventilation slots regularly, replace worn carbon brushes, sharpen or replace the blade |
| Spare parts and repairability | Blade, carbon brushes, brush holders, guide support available |
| Included accessories | Saw blade, clamping key, parallel guide, dust bag |
| Protection class | Class II (double insulation) |
| Sound level (LpA) | 95 dB(A) |
| Vibration (ah) | 2.5 m/s² |
Frequently Asked Questions - KG340.9 KRESS
How to adjust the cutting depth on the Kress KG340.9 saw?
Loosen the depth adjustment lever on the side of the saw, adjust the base plate to the desired depth (up to 65 mm at 90°), then tighten the lever. Use the graduated scale for optimal precision.
Can I use the saw to cut metal?
No, the Kress KG340.9 saw is designed only for wood and wood-based materials (panels, chipboard, etc.). Using it on metal can damage the blade and compromise safety.
How to change the blade of the KG340.9 saw?
Unplug the tool. Press the spindle lock, then use the provided wrench to loosen the center screw. Remove the old blade and install the new one respecting the rotation direction. Tighten the screw firmly.
The blade gets stuck during cutting, what to do?
Check that the blade is sharp and suitable for the material. Reduce the feed speed and ensure the workpiece is properly held. If the blockage persists, check the guide alignment.
How to use the parallel guide?
Insert the guide into the slots on the base plate, tighten the knobs. Adjust the distance between the blade and the guide using the scale. This allows straight cuts parallel to the edge of the workpiece.
What is the maximum cutting depth at 45°?
The maximum cutting depth at 45° is 45 mm. For a cut at 90°, it is 65 mm.
How to maintain the carbon brushes of the saw?
The carbon brushes should be checked every 50 hours of use. Unscrew the caps on the motor, remove worn brushes (less than 5 mm) and replace them with identical brushes. Consult the manual for part numbers.
The blade brake no longer works, what to do?
The blade brake is a safety device. If it does not activate, unplug the tool and check the connections. If the problem persists, contact an authorized Kress service center for replacement.
Can I use the saw with a vacuum cleaner?
Yes, the saw is equipped with a 35 mm dust extraction port. Connect a suitable vacuum cleaner to reduce dust during cutting.
What are the recommended accessories for this saw?
Recommended accessories include additional blades (for wood or laminate), a laser guide kit, and a replacement dust bag. Always use original Kress accessories.
User questions about KG340.9 KRESS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual KG340.9 - KRESS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KG340.9 by KRESS.
USER MANUAL KG340.9 KRESS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KRESS
Model : KG340.9
Category : Saw