Smartvest Pro FUEM45000 - Detector ABUS - Free user manual and instructions
Find the device manual for free Smartvest Pro FUEM45000 ABUS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Detector for Smartvest Pro Alarm System |
| Model | Smartvest Pro FUEM45000 |
| Brand | Abus |
| Dimensions (approx.) | 35 x 85 x 25 mm |
| Weight | 35 g (including battery) |
| Power Supply | 1x CR123A battery (3V) |
| Battery Life | Up to 3 years (typical use) |
| Wireless Protocol | Abus proprietary (868 MHz) |
| Range | Up to 100 m in open field |
| Detection Type | Passive infrared (PIR) motion detection |
| Detection Angle | 90° horizontal |
| Detection Range | Up to 12 m |
| Tamper Protection | Yes, tamper switch against removal |
| Operating Temperature | -10°C to +55°C |
| Humidity Range | 0% to 85% (non-condensing) |
| Mounting | Wall mount with included bracket |
| Compatibility | Abus Smartvest Pro alarm system (base station required) |
| Indicators | LED for alarm and status |
| Included Accessories | Mounting bracket, screws, anchors, battery, manual |
| Key Features | Wireless, battery-powered, easy installation, low battery notification |
| Maintenance & Cleaning | Wipe with a dry cloth; do not use solvents |
| Safety | Complies with EU directives; CE marked |
| Spare Parts & Repairability | Battery replaceable; no user-serviceable parts inside |
Frequently Asked Questions - Smartvest Pro FUEM45000 ABUS
How do I pair the FUEM45000 with my Smartvest Pro base station?
Insert the battery, wait for LED to flash slowly, then put the base station into learning mode. Press the tamper switch three times to register the detector. Refer to the manual for detailed steps.
What is the battery type and how long does it last?
The detector uses a CR123A 3V lithium battery. Under normal usage, the battery can last up to 3 years.
Can I use the detector outdoors?
The FUEM45000 is designed for indoor use only. It is not weatherproof and should be mounted in a dry, sheltered location.
What is the detection range and angle?
The detector has a 90° horizontal detection angle and a maximum range of 12 meters.
How do I change the battery?
Remove the detector from the bracket, slide off the cover, replace the CR123A battery with a new one, and reattach the cover. Ensure proper polarity.
Why is the LED flashing red?
A flashing red LED usually indicates low battery or a tamper alarm. Check battery level and ensure the detector is securely mounted.
Can I install the detector on a metal surface?
Mounting on metal can reduce wireless range. Use the included spacers to create distance or avoid metal surfaces if possible.
What should I do if the detector doesn't trigger?
First, check that the detection area is clear of obstructions. Ensure the battery is fresh and the detector is within range of the base station. Re-pair if necessary.
Is the detector compatible with other Abus alarm systems?
The FUEM45000 is specifically designed for the Smartvest Pro system. It may not work with older Abus systems or other brands.
How do I clean the detector?
Gently wipe the housing with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners as they may damage the plastic.
User questions about Smartvest Pro FUEM45000 ABUS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Detector in PDF format for free! Find your manual Smartvest Pro FUEM45000 - ABUS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Smartvest Pro FUEM45000 by ABUS.
USER MANUAL Smartvest Pro FUEM45000 ABUS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ABUS
Model : Smartvest Pro FUEM45000
Category : Detector