SpeedMATE - Industrial sensor Wachendorff - Free user manual and instructions
Find the device manual for free SpeedMATE Wachendorff in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Tachometer |
| Model | SpeedMATE |
| Brand | Wachendorff |
| Measurement Range | 0.5 to 100,000 RPM |
| Accuracy | ±0.05% of reading |
| Display | LCD, 5 digits, 8 mm height |
| Power Supply | 2 x AA batteries (1.5V each) |
| Battery Life | Approximately 40 hours continuous use |
| Dimensions (H x W x D) | 160 x 72 x 37 mm |
| Weight | 180 g (including batteries) |
| Measurement Principle | Optical (laser) or contact (adaptor) |
| Sampling Rate | 1 sample per second |
| Memory Functions | Last, max, min values |
| Auto Power Off | After 5 minutes of inactivity |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | Up to 90% non-condensing |
| Safety Standards | CE, RoHS compliant |
| Maintenance | Clean lens with soft dry cloth; replace batteries when low |
| Spare Parts / Reparability | Contact Wachendorff customer service for replacement parts or repair |
| Accessories Included | Reflective tape, contact adaptor (optional), carrying case |
Frequently Asked Questions - SpeedMATE Wachendorff
How do I measure RPM with the SpeedMATE?
For optical measurement, apply reflective tape to the rotating object and point the laser. For contact measurement, use the adaptor and press the tip against the rotating shaft. The RPM will be displayed on the LCD.
What is the maximum RPM I can measure?
The SpeedMATE can measure up to 100,000 RPM with optical mode and up to 20,000 RPM with contact adaptor.
How do I change the batteries?
Slide open the battery compartment on the back, remove old batteries, and insert two new AA batteries observing polarity.
Why is my reading unstable?
Ensure the reflective tape is clean and applied properly. For contact measurements, ensure steady and even pressure. Also check battery level as low batteries can cause erratic readings.
Can I use the SpeedMATE on shiny surfaces?
Yes, but you may need to use a matte reflective tape or reduce ambient light interference. The optical sensor works best with a distinct reflective mark.
How do I calibrate the SpeedMATE?
The SpeedMATE is factory calibrated and does not require user calibration. For verification, you can use a known speed source such as a calibration motor.
What is the accuracy of the device?
The accuracy is ±0.05% of reading ±1 digit for optical mode, and ±0.1% for contact mode.
Does it have a data hold feature?
Yes, press the "HOLD" button to freeze the current reading. Press again to release. The device also stores last, maximum, and minimum values.
Can I connect it to a PC?
The standard SpeedMATE does not have PC connectivity. For data logging, consider the SpeedMATE Plus model with USB output.
How do I clean the lens?
Use a soft, lint-free cloth slightly dampened with water or lens cleaner. Do not use abrasive materials or solvents.
User questions about SpeedMATE Wachendorff
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Industrial sensor in PDF format for free! Find your manual SpeedMATE - Wachendorff and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SpeedMATE by Wachendorff.
USER MANUAL SpeedMATE Wachendorff
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Wachendorff
Model : SpeedMATE
Category : Industrial sensor