6220 - Uncategorized PeakTech - Free user manual and instructions
Find the device manual for free 6220 PeakTech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | PeakTech |
| Model | 6220 |
| Product Type | Digital Multimeter |
| Display | LCD, 2000 counts |
| DC Voltage Range | 200mV - 1000V |
| AC Voltage Range | 200mV - 750V |
| DC Current Range | 200μA - 10A |
| AC Current Range | 200μA - 10A |
| Resistance Range | 200Ω - 20MΩ |
| Capacitance Measurement | 2nF - 200μF |
| Frequency Measurement | 2kHz - 200kHz |
| Diode Test | Yes |
| Continuity Test | Yes (buzzer) |
| Backlight | Yes |
| Auto Range | No (manual ranging) |
| Data Hold | Yes |
| Safety Rating | CAT II 600V |
| Power Supply | 9V battery (6F22) |
| Battery Life | Approximately 200 hours (alkaline) |
| Dimensions | 185 x 87 x 45 mm |
| Weight | 320 g (including battery) |
| Accessories Included | Test leads, 9V battery, manual |
| Warranty | 2 years |
Frequently Asked Questions - 6220 PeakTech
How do I select the measurement function?
Turn the rotary dial to the desired function (e.g., V for voltage, A for current). Ensure the test leads are connected to the correct jacks.
Why does the display show '1' (overload)?
The measured value exceeds the selected range. Select a higher range or use autoranging if available.
How do I measure resistance?
Set the dial to the Ω position. Connect the test leads across the resistor. Ensure the circuit is de-energized for accurate reading.
What battery does the meter use?
It uses a standard 9V battery (6F22). Replace it when the low battery indicator appears.
How to replace the battery?
Turn off the meter, remove the screw on the back cover, lift the cover, replace the battery with a new 9V battery, and close the cover.
Is the meter safe for mains voltage measurement?
Yes, it is rated CAT II 600V, suitable for measuring household mains circuits.
How do I test continuity?
Set the dial to the continuity/beep symbol. Connect the test leads; a continuous beep indicates a closed circuit.
Can I measure capacitance?
Yes, select the capacitance (F) range. Ensure the capacitor is discharged before measurement.
What is the maximum current I can measure?
10A for up to 10 seconds, with a 10-minute recovery period. For continuous measurement, use the lower current ranges.
How to clean the meter?
Wipe the casing with a damp cloth. Do not use solvents or abrasives. Keep the input jacks clean.
User questions about 6220 PeakTech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual 6220 - PeakTech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 6220 by PeakTech.
USER MANUAL 6220 PeakTech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PeakTech
Model : 6220
Category : Uncategorized