1094 - Measuring equipment PeakTech - Free user manual and instructions
Find the device manual for free 1094 PeakTech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Multimeter |
| Dimensions | 180 x 85 x 35 mm |
| Weight | Approximately 300 g |
| Power Supply | 9V battery (6F22 or equivalent) |
| DC Voltage Range | 200 mV to 1000 V |
| AC Voltage Range | 200 mV to 750 V |
| DC Current Range | 200 µA to 10 A |
| Resistance Range | 200 Ω to 20 MΩ |
| Additional Functions | Continuity test, diode test, transistor test |
| Safety Rating | CAT II 1000V / CAT III 600V |
| Display | LCD, 2000 counts (3 1/2 digits) |
| Accessories Included | Test leads, battery, manual |
| Maintenance | Clean housing with dry cloth; replace battery when low |
| Repairability | Replaceable fuses and battery; no user-serviceable parts inside |
| Spare Parts Availability | Test leads and fuses available from PeakTech or distributors |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -10°C to 50°C (14°F to 122°F) |
| Humidity | ≤80% RH (non-condensing) |
| Brand | PeakTech |
| Model | 1094 |
Frequently Asked Questions - 1094 PeakTech
How do I measure DC voltage with the PeakTech 1094?
Set the rotary switch to the DC voltage range (V--). Connect the black test lead to COM and red to V/Ω. Touch the probes to the circuit. Read the value on the LCD.
What does the continuity test function do?
The continuity test emits a beep when resistance is below a threshold (typically < 100 Ω), indicating a closed circuit.
How do I replace the battery?
Turn off the meter. Remove the screw on the back cover. Lift the cover and replace the 9V battery with a new one. Reattach the cover.
What safety precautions should I take?
Always start with the highest range. Do not measure voltage above 1000V DC or 750V AC. Use proper test leads. Disconnect power before measuring resistance.
How do I measure current?
Set the rotary switch to the desired current range (A-- or A~). Insert the red lead into the A or mA jack. Break the circuit and connect the meter in series.
Why does the display show '1'?
A '1' on the leftmost digit indicates overload. The measured value exceeds the selected range. Switch to a higher range.
Can I measure temperature?
No, the PeakTech 1094 does not have a temperature measurement function. It includes voltage, current, resistance, diode, and continuity tests.
What is the input impedance?
The input impedance for voltage measurements is typically 10 MΩ, which minimizes loading on the circuit.
How do I clean the multimeter?
Use a soft dry cloth to clean the housing. Do not use chemicals or water. Ensure the meter is turned off and dry before use.
Are replacement test leads available?
Yes, PeakTech offers replacement test leads. They are standard with 4mm banana plugs. Order from PeakTech or authorized dealers.
User questions about 1094 PeakTech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual 1094 - PeakTech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 1094 by PeakTech.
USER MANUAL 1094 PeakTech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PeakTech
Model : 1094
Category : Measuring equipment