2025 - Measuring equipment PeakTech - Free user manual and instructions
Find the device manual for free 2025 PeakTech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Multimeter |
| Brand | PeakTech |
| Model | 2025 |
| Dimensions (approx.) | 180 x 80 x 40 mm |
| Weight (approx.) | 350 g |
| Power Supply | 9V battery (PP3) |
| Display | LCD, 2000 counts |
| DC Voltage Range | 200 mV to 600 V |
| AC Voltage Range | 2 V to 600 V |
| DC Current Range | 200 µA to 10 A |
| Resistance Range | 200 Ω to 20 MΩ |
| Capacitance Measurement | Yes |
| Frequency Measurement | Yes |
| Diode and Continuity Test | Yes |
| Safety Category | CAT II 600 V |
| Overload Protection | Yes |
| Auto Power Off | Yes |
| Data Hold | Yes |
| Accessories Included | Test leads, battery, user manual |
| Maintenance | Clean with dry cloth; avoid moisture |
| Spare Parts / Repairability | Replaceable fuse and battery |
Frequently Asked Questions - 2025 PeakTech
How do I measure DC voltage with the PeakTech 2025?
Set the rotary switch to the DC voltage range suitable for your expected measurement. Connect the red test lead to the VΩmA input and the black lead to COM. Touch the probes to the circuit and read the display.
What does the 'Hold' button do?
The Hold button freezes the current reading on the display so you can note it down safely. Press it again to release.
How do I replace the fuse?
Turn off the meter and remove the test leads. Open the battery/fuse compartment with a screwdriver. Replace the blown fuse with one of the same rating (usually 10A or 200mA). Close securely.
What is the maximum input voltage for current measurements?
Do not exceed 600V AC/DC on the meter. For current measurements, ensure the leads are correctly connected to the mA or 10A input as marked.
How do I test continuity?
Turn the dial to the continuity setting (usually a diode symbol with sound waves). Connect the probes across the circuit. A beep indicates continuity (resistance below ~50 Ω).
Can I measure capacitance with this meter?
Yes, select the capacitance mode (often marked with a cap symbol). Discharge the capacitor first, then insert it into the dedicated socket or probes. Read the value on the display.
What battery does the PeakTech 2025 use?
It uses a standard 9V PP3 battery. When the battery icon appears low, replace it promptly to avoid inaccurate readings.
How do I clean the multimeter?
Use a soft, dry cloth to wipe the exterior. Do not use solvents or immerse the device. Clean test leads with a damp cloth and let dry.
What is the auto power-off time?
The meter automatically turns off after approximately 30 minutes of inactivity to save battery. Press any button or turn the dial to wake it up.
Is the PeakTech 2025 safe for mains voltage measurement?
Yes, it is rated CAT II 600V, suitable for measuring single-phase household circuits. Always use proper safety gear and follow the manual.
User questions about 2025 PeakTech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual 2025 - PeakTech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 2025 by PeakTech.
USER MANUAL 2025 PeakTech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PeakTech
Model : 2025
Category : Measuring equipment