MBMHD1 - Uncategorized Eliminator Lighting - Free user manual and instructions
Find the device manual for free MBMHD1 Eliminator Lighting in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Moving Head Spotlight |
| Light Source | LED 230W |
| Beam Angle | 5° – 30° (zoom) |
| DMX Channels | 16 / 20 / 28 selectable |
| Pan Range | 540° |
| Tilt Range | 270° |
| Color Wheel | 14 dichroic colors + open |
| Gobos | 14 rotating + 18 static gobos |
| Prism | 3-facet rotating |
| Dimming | 0-100% electronic |
| Strobe | 1-25 Hz |
| Control Protocols | DMX512, RDM |
| Display | LCD color screen |
| Power Supply | AC 100-240V, 50-60Hz |
| Power Consumption | 350W |
| Dimensions (L x W x H) | 380 x 250 x 450 mm |
| Weight | 12.5 kg |
| IP Rating | IP20 (indoor use only) |
| Cooling | Silent fan |
| Mounting | Omega brackets with safety cable loop |
| Included Accessories | Power cord, DMX cable, manual, safety cable |
Frequently Asked Questions - MBMHD1 Eliminator Lighting
How do I set the DMX address on the MBMHD1?
Press the Menu button to enter the control panel, then use Up/Down to navigate to DMX Address. Press Enter, set the address using the same buttons, and confirm.
What is the recommended cleaning procedure for the lens?
Use a soft, lint-free cloth slightly dampened with a mild glass cleaner or isopropyl alcohol. Gently wipe the lens in a circular motion, avoiding excessive pressure.
Can I use the MBMHD1 outdoors?
No, the MBMHD1 has an IP20 rating, meaning it is designed for indoor use only. Exposure to moisture or dust may damage the fixture.
How do I replace a faulty gobo?
Disconnect the fixture from power. Remove the gobo wheel cover, carefully extract the old gobo using tweezers, and install the new one with the textured side facing the lamp. Reassemble and test.
The fixture is not responding to DMX. What should I check?
Verify that the DMX cable is properly connected and not damaged. Ensure the DMX address matches the controller and that the controller is on the correct universe. Also check that the fixture is in DMX mode (not standalone).
What is the maximum ambient temperature for operation?
The MBMHD1 can operate in ambient temperatures up to 40°C (104°F). Ensure adequate ventilation and do not block the cooling fans.
How do I reset the pan/tilt to home position?
From the menu, navigate to Fixture Settings and select Reset or Home Position. The fixture will automatically realign to its default position.
Can I run this fixture in sound-active mode?
Yes, the MBMHD1 has a built-in microphone for sound activation. Set the fixture to Sound Active mode via the menu, and adjust the sensitivity if needed.
What type of fuse does the MBMHD1 use?
It uses a 10A, 250V slow-blow fuse. Replace only with the same type and rating to avoid damage.
How often should I lubricate the moving parts?
Moving parts (pan/tilt motors) should be lubricated every 12 months or after 500 hours of operation using a silicone-based lubricant recommended by the manufacturer.
User questions about MBMHD1 Eliminator Lighting
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual MBMHD1 - Eliminator Lighting and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MBMHD1 by Eliminator Lighting.
USER MANUAL MBMHD1 Eliminator Lighting
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eliminator Lighting
Model : MBMHD1
Category : Uncategorized