Mister Kool EP - Uncategorized Eliminator Lighting - Free user manual and instructions
Find the device manual for free Mister Kool EP Eliminator Lighting in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of Product | Fog Machine |
| Brand | Eliminator Lighting |
| Model | Mister Kool EP |
| Power Consumption | 1000W |
| Voltage | 120V / 60Hz (US) or 230V / 50Hz (EU) |
| Fluid Capacity | 1.5 liters |
| Heating Time | Approximately 5 minutes |
| Fog Output | 2,000 cfm (cubic feet per minute) |
| Control Options | DMX-512, wired remote, and onboard LCD display |
| DMX Channels | 1 or 2 (selectable) |
| Dimensions (L x W x H) | 420 x 260 x 240 mm |
| Weight | 6.5 kg |
| Housing Material | Steel and heat-resistant plastic |
| Safety Features | Overheat protection, automatic shut-off, thermal fuse |
| Recommended Fluid | Water-based fog fluid (Eliminator brand recommended) |
| Cleaning Instructions | Run a mixture of distilled water and vinegar through the system after every 20 hours of use |
| Maintenance | Regularly check and clean the nozzle; replace fuse if blown |
| Spare Parts Availability | Replacement pumps, heaters, and fuses available from authorized dealers |
| Warranty | One-year limited warranty |
Frequently Asked Questions - Mister Kool EP Eliminator Lighting
What type of fluid should I use with the Mister Kool EP?
Use only water-based fog fluid. For best results and to avoid clogging, use Eliminator brand fog fluid or a high-quality equivalent. Do not use oil-based fluids.
How do I clean the fog machine?
After every 20 hours of use, run a mixture of distilled water and white vinegar (1:1 ratio) through the machine to remove mineral deposits. Then run clean distilled water to flush.
Can I control the fog machine with DMX?
Yes, it supports DMX-512 control. Use the onboard menu to select 1 or 2-channel mode. Connect a DMX controller via XLR cables.
What does the 'EP' in Mister Kool EP stand for?
'EP' likely stands for Enhanced Performance or a specific series. It indicates improved output and reliability compared to standard models.
How long does the heating time take?
The initial heat-up takes approximately 5 minutes. The indicator light will turn green when ready. Subsequent reheats are faster.
What safety features does the machine have?
It includes overheat protection and an automatic shut-off function that activates if the internal temperature exceeds safe limits.
Can I use long extension cords?
Avoid extension cords longer than 15 meters to prevent voltage drop. Use a heavy-duty cord rated for at least 15 amps.
How do I troubleshoot if no fog comes out?
Check that the fluid tank is full, the machine is heated up, and the nozzle is not clogged. Also ensure the remote or DMX is connected properly. If still no output, the pump or heater may need service.
What is the maximum fog output?
The machine produces up to 2,000 cfm (cubic feet per minute) of fog at full output, depending on ambient conditions.
Where can I find spare parts or service?
Contact Eliminator Lighting authorized dealers or visit their website for replacement parts like pumps, heaters, and fuses. Service centers are listed in the manual.
User questions about Mister Kool EP Eliminator Lighting
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Mister Kool EP - Eliminator Lighting and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Mister Kool EP by Eliminator Lighting.
USER MANUAL Mister Kool EP Eliminator Lighting
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eliminator Lighting
Model : Mister Kool EP
Category : Uncategorized