VF1300 EP - Uncategorized Eliminator Lighting - Free user manual and instructions
Find the device manual for free VF1300 EP Eliminator Lighting in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fog Machine |
| Brand | Eliminator Lighting |
| Model | VF1300 EP |
| Power Consumption | 1300 W |
| Voltage | 120 V / 60 Hz (US) or 230 V / 50 Hz (EU) |
| Warm-up Time | Approx. 3-4 minutes |
| Fluid Tank Capacity | 2.5 L (0.66 gal) |
| Fog Output | Approx. 10,000 cu ft/min |
| Control | Wired remote (included), optional DMX |
| DMX Channels | 1 or 2 (selectable) |
| Dimensions (L x W x H) | 17.5 x 10.5 x 11.5 in (44.5 x 26.7 x 29.2 cm) |
| Weight | 12.5 lbs (5.7 kg) |
| Housing Material | Steel with high-temperature paint |
| Safety Features | Thermal cutoff, automatic shut-off |
| Fluid Type | Water-based fog fluid (recommended) |
| Cleaning | Periodic cleaning with distilled water or cleaning fluid |
| Replacement Parts | Heater, pump, fuse, remote control |
| Certifications | ETL, CE |
Frequently Asked Questions - VF1300 EP Eliminator Lighting
What type of fog fluid should I use with the VF1300 EP?
Use only water-based fog fluid recommended by Eliminator Lighting. Using oil-based or other fluids may damage the machine and void the warranty.
How long does the warm-up time take?
The warm-up time is approximately 3-4 minutes. The indicator light will change from red to green when ready.
Can I control the VF1300 EP via DMX?
Yes, the machine can operate in DMX mode with 1 or 2 channels. Use the DIP switches to set the DMX address.
What is the maximum continuous output time?
The maximum continuous output is about 30 seconds, after which the unit requires a brief rest period to avoid overheating.
How do I clean the fog machine?
Run a mixture of distilled water and cleaning fluid (or pure distilled water) through the machine periodically to prevent clogging.
What should I do if the fog output is weak?
Check the fluid level, ensure the heater has warmed up fully, and clean the nozzle and pump. If issues persist, inspect the fuse.
Does the machine come with a remote?
Yes, a wired remote control is included with a 15 ft cable. The remote allows timer and continuous output.
What is the replacement fuse rating?
The replacement fuse is a 10A, 250V glass fuse. Always replace with the same type and rating.
Can I use an extension cord?
Yes, but use a heavy-duty extension cord rated for at least 15A. Avoid coil cords to prevent overheating.
How do I store the fog machine?
After use, run distilled water through the system to clean, then drain all fluid. Store in a dry, cool place upright.
User questions about VF1300 EP Eliminator Lighting
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual VF1300 EP - Eliminator Lighting and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VF1300 EP by Eliminator Lighting.
USER MANUAL VF1300 EP Eliminator Lighting
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eliminator Lighting
Model : VF1300 EP
Category : Uncategorized