Vortex - Uncategorized Eliminator Lighting - Free user manual and instructions
Find the device manual for free Vortex Eliminator Lighting in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Moving Head Effect Light |
| Model | Vortex |
| Brand | Eliminator Lighting |
| Light Source | LED 100W Cool White |
| Beam Angle | 3° |
| DMX Channels | 13/15/17 selectable |
| Control Protocols | DMX512, Master/Slave, Sound Active, Auto Program |
| Pan Range | 540° |
| Tilt Range | 270° |
| Power Consumption | 150W max |
| Input Voltage | AC 100-240V, 50/60Hz |
| Dimensions (L x W x H) | 9.5 x 8.7 x 12.2 in (241 x 221 x 310 mm) |
| Weight | 8.2 lbs (3.7 kg) |
| Housing Material | ABS Plastic and Metal |
| Cooling | Active Fan Cooled |
| Display | LED Digital Display with Menu Buttons |
| Safety Features | Safety cable attachment point, overheat protection |
| Cleaning | Clean lens with soft cloth and glass cleaner |
| Spare Parts | LED module, power supply, mainboard, fans, lens |
| Repairability | Modular design; parts replaceable by qualified technician |
Frequently Asked Questions - Vortex Eliminator Lighting
How do I set the DMX address on the Vortex?
Press the Menu button to enter the menu. Use Up/Down to navigate to 'DMX Address', press Enter. Use Up/Down to set the desired address (1-512), then press Enter to confirm.
How to connect multiple Vortex lights in Master/Slave mode?
Set one unit as Master by setting it to Auto or Sound mode. Set the others as Slave by navigating to 'Slave' mode in the menu. Connect all units via DMX cables (daisy chain). No DMX controller needed.
Can the Vortex operate without a DMX controller?
Yes, it has built-in sound active and auto programs. Use the menu to select 'Sound Active' or 'Auto' mode for standalone operation.
How to clean the lens of the Vortex?
Use a soft, lint-free cloth slightly dampened with a mild glass cleaner. Gently wipe the lens in a circular motion. Avoid abrasive materials or excessive moisture.
What is the recommended power source for the Vortex?
Connect to a grounded AC outlet with voltage 100-240V, 50/60Hz. Use a power cord rated for at least 10A. Avoid using extension cords if possible.
How to replace the LED module?
Disconnect power. Remove the screws on the front bezel. Carefully disconnect the wires from the old module. Install the new module and reconnect. Reassemble. Have a qualified technician perform this if unsure.
My Vortex is not responding to DMX. What should I check?
Ensure the DMX cable is properly connected and not damaged. Verify the DMX address matches the controller. Check that the unit is set to 'DMX' mode. Try a different DMX cable or controller.
What should I do if the fan is making noise?
Inspect the fan for dust or debris. Clean using compressed air. If noise persists, the fan may need replacement. Contact technical support.
Can the Vortex be mounted upside down?
Yes, it can be mounted in any orientation. Use a properly rated clamp and safety cable. Ensure the mounting structure can support the weight.
How to update firmware on the Vortex?
Firmware updates are not user-serviceable. Contact Eliminator Lighting support or an authorized service center for updates.
User questions about Vortex Eliminator Lighting
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Vortex - Eliminator Lighting and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Vortex by Eliminator Lighting.
USER MANUAL Vortex Eliminator Lighting
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eliminator Lighting
Model : Vortex
Category : Uncategorized