Whisper Flex 2 - Air Conditioning DUUX - Free user manual and instructions
Find the device manual for free Whisper Flex 2 DUUX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Portable air conditioner |
| Model | Whisper Flex 2 |
| Brand | Duux |
| Cooling capacity | 2.6 kW (approx. 9000 BTU/h) |
| Heating capacity | 2.2 kW (heat pump) |
| Room size recommendation | Up to 70 m² |
| Noise level | 25 - 42 dB(A) |
| Power input (cooling) | 950 W |
| Power input (heating) | 800 W |
| Airflow | 300 - 400 m³/h |
| Refrigerant | R32 |
| Water tank capacity | 0.8 L (built-in, self-evaporation) |
| Dimensions (WxDxH) | 35.5 x 38.0 x 72.0 cm |
| Net weight | 24.5 kg |
| Power supply | 220-240 V / 50 Hz |
| Energy label | A++ |
| Functions | Cooling, heating, fan, dehumidification, sleep mode, timer |
| Control | Remote control, touch panel |
| Filter | Washable fine dust filter |
| Exhaust hose length | 1.5 m (flexible) |
| Installation | Freestanding, window kit included |
| Maintenance | Clean filter every 2 weeks, empty water tank if needed |
Frequently Asked Questions - Whisper Flex 2 DUUX
How do I clean the filter on my Duux Whisper Flex 2?
Turn off and unplug the unit. Open the filter cover (usually at the back or side). Remove the filter and vacuum or rinse with water. Let it dry completely before reinserting. Clean every 2 weeks for optimal performance.
Does the Whisper Flex 2 need a water tank to be emptied?
The unit has a self-evaporation system that recycles most of the condensate. However, if you use it in dehumidification mode or high humidity, you may need to empty the 0.8 L tank periodically. Check the indicator light.
What is the noise level of the Whisper Flex 2?
The noise level ranges from 25 dB(A) on low fan speed to 42 dB(A) on high speed. It is designed to be quiet, especially in sleep mode.
Can I use the Whisper Flex 2 as a heat pump in winter?
Yes, the Whisper Flex 2 has a heat pump function that provides heating with a capacity of 2.2 kW, effective down to about 5°C outdoor temperature. However, it is not intended as a primary heat source in very cold climates.
How do I set the timer on the Whisper Flex 2?
Press the Timer button on the remote or control panel. Use +/- to set the desired time (1-24 hours). The unit will turn on or off automatically after the set time. Confirm by pressing Timer again.
What does the error code 'E1' mean?
Error code E1 indicates a temperature sensor malfunction. Turn off the unit, unplug it for 10 minutes, and restart. If the error persists, contact Duux customer service.
Can I use an extension cord with the Whisper Flex 2?
It is not recommended to use an extension cord as it may cause voltage drop or overheating. Plug the unit directly into a grounded wall outlet. If necessary, use a heavy-duty cord rated at least 15A.
How do I drain the Whisper Flex 2 for storage?
Run the unit in fan-only mode for a few hours to dry out internal moisture. Then, remove the drain plug at the bottom (if any) to release any remaining water. Clean and dry the filter before storing in a dry place.
What is the recommended room size for the Whisper Flex 2?
The unit is suitable for rooms up to 70 m² (approximately 750 sq ft). For best results, ensure the room is well-insulated and windows are sealed.
Where can I download the user manual for the Duux Whisper Flex 2?
You can download the manual for free from notice-facile.com. Search for 'Whisper Flex 2 Duux' and select the PDF option. Alternatively, visit the Duux official website support page.
User questions about Whisper Flex 2 DUUX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual Whisper Flex 2 - DUUX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Whisper Flex 2 by DUUX.