SNC-DH110T - Surveillance Camera SONY - Free user manual and instructions
Find the device manual for free SNC-DH110T SONY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Surveillance Camera |
| Model | Sony SNC-DH110T |
| Image Sensor | 1/3-inch CMOS, 1.3 Megapixels |
| Resolution | 1280×1024 (SXGA) at 30fps |
| Lens | Fixed focal length, 3.0mm (approx. 87° horizontal) |
| Minimum Illumination | 0.3 lx (color), 0 lx with IR |
| Day/Night Function | Yes, with IR cut filter |
| Compression | H.264, MPEG-4, JPEG |
| Network | 10/100BASE-TX, PoE (IEEE 802.3af) |
| Dimensions (D×H) | Approx. 140 mm × 100 mm |
| Weight | Approx. 0.8 kg |
| Power Source | PoE (Power over Ethernet) |
| Power Consumption | Max. 8W |
| Operating Temperature | -10°C to 50°C |
| Operating Humidity | 20% to 80% (non-condensing) |
| Main Features | Motion detection, ONVIF compliance, day/night mode, privacy masking |
| Maintenance | Clean outer dome with soft dry cloth; avoid liquid cleaners |
| Safety | Use only supplied or PoE power; install in secure location |
| Spare Parts & Repairability | No user-serviceable parts; contact Sony service center |
| General Information | Indoor/outdoor use; IP66 rated (if applicable) – check manual |
Frequently Asked Questions - SNC-DH110T SONY
How do I reset the Sony SNC-DH110T to factory defaults?
Press and hold the reset button on the camera for about 10 seconds until the indicator blinks. The camera will reboot with factory settings.
What are the mounting requirements for the camera?
Mount the camera on a sturdy ceiling or wall using the included bracket. Ensure the surface can support at least 3 kg and that cables are routed securely.
Does the SNC-DH110T support Power over Ethernet (PoE)?
Yes, the camera supports IEEE 802.3af PoE. You can power it directly from a PoE switch or injector without a separate power supply.
How do I access the camera's web interface?
Find the camera's IP address on your network (using SNM or a similar tool). Enter the IP address in a web browser. Default login credentials are admin/admin (change after first login).
Can I use the camera in outdoor environments?
The SNC-DH110T is designed for indoor use only. For outdoor applications, use an appropriate housing with IP66 rating.
What video formats are supported for recording?
The camera supports H.264 (MPEG-4 Part 10), MPEG-4, and JPEG compression. You can choose between constant bitrate and variable bitrate modes.
How do I set up motion detection?
Go to the Motion Detection menu in the web interface. Draw detection regions and set sensitivity (1-5) as needed. The camera will send alerts upon motion triggers.
What is the maximum frame rate at SXGA resolution?
At 1280×1024 (SXGA), the camera can deliver up to 30 frames per second in both H.264 and JPEG modes.
How do I clean the camera lens?
Use a soft, lint-free cloth slightly dampened with water or lens cleaner. Gently wipe the dome cover in a circular motion. Never use abrasive cleaners.
Why is the camera showing no video?
Check that the camera is receiving power (LED indicator should be on), the network cable is connected, and the IP address is correctly configured. Also verify that your browser has Java or ActiveX enabled for video streaming.
User questions about SNC-DH110T SONY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual SNC-DH110T - SONY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SNC-DH110T by SONY.
USER MANUAL SNC-DH110T SONY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SONY
Model : SNC-DH110T
Category : Surveillance Camera