SNC-CH115 - Surveillance Camera SONY - Free user manual and instructions
Find the device manual for free SNC-CH115 SONY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Surveillance Camera |
| Brand | Sony |
| Model | SNC-CH115 |
| Image Sensor | 1/3-type CMOS |
| Effective Pixels | Approx. 1.3 megapixels |
| Minimum Illumination | 0.5 lux (F1.2) |
| Lens | Built-in varifocal, f=3.0–9.0 mm |
| Day/Night | True day/night with IR cut filter |
| Video Compression | JPEG, MPEG-4, H.264 |
| Max Resolution | 1280×1024 (SXGA) |
| Frame Rate | Up to 30 fps |
| Audio | Built-in microphone, line input |
| Network Interface | 10BASE-T/100BASE-TX, Ethernet |
| Supported Protocols | IPv4, TCP, UDP, HTTP, SNMP, SMTP, FTP |
| Power | PoE (IEEE802.3af), AC 24V, DC 12V |
| Power Consumption | Max. 10 W |
| Dimensions (W×H×D) | 140 mm × 68 mm × 62 mm |
| Weight | 430 g |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Security | Multi-level user access, IP filtering |
| Approvals | UL, CE, FCC |
Frequently Asked Questions - SNC-CH115 SONY
How do I reset the camera to factory defaults?
Press and hold the reset button on the camera for about 5 seconds using a pointed object. The camera will reboot and restore factory settings.
How do I access the camera via web browser?
Connect the camera to your network and find its IP address via DHCP. Open a web browser and enter the IP address. The default username and password are admin and admin (or as printed on the label).
How to set up motion detection?
Log into the camera web interface, go to Event → Motion Detection. Enable motion detection, configure sensitivity and area, then set up actions like email or recording.
What power options are available?
The camera supports Power over Ethernet (PoE) (IEEE802.3af) as well as AC 24V or DC 12V input. Use only the supplied power adapter or a PoE switch.
How to update firmware?
Download the latest firmware from the Sony support site. Log into the camera web interface, go to System → Firmware Upgrade, select the file, and start the upgrade. Do not power off during update.
Can I view the camera remotely?
Yes, if the camera is connected to the internet and properly configured. Use port forwarding or UPnP in the network settings. Access via web browser or a compatible video management software.
How to set up recording?
You can record to a network attached storage (NAS) or a computer using the camera's built-in recording function. Configure recording in Event → Recording or use external software like Sony RealShot Manager.
What is the default IP address?
The camera uses DHCP by default. If no DHCP server is found, it uses a link-local address (169.254.x.x). You can find the IP using the SNC Toolbox software included on the CD.
How to clean the lens?
Use a soft, dry cloth to gently wipe the lens. If needed, use a lens cleaning solution applied to the cloth, not directly on the lens. Avoid touching the lens with fingers.
How to mount the camera?
The camera can be mounted on a wall or ceiling using the supplied bracket. Ensure the surface is sturdy. Insert screws into the bracket and attach the camera. Adjust the pan/tilt as needed.
User questions about SNC-CH115 SONY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual SNC-CH115 - SONY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SNC-CH115 by SONY.
USER MANUAL SNC-CH115 SONY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SONY
Model : SNC-CH115
Category : Surveillance Camera