N286-01G-SX-C - Network card / adapter Tripp Lite - Free user manual and instructions
Find the device manual for free N286-01G-SX-C Tripp Lite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network card / adapter |
| Model | N286-01G-SX-C |
| Brand | Tripp Lite |
| Host Interface | PCI Express x1 |
| Optical Connector | LC duplex |
| Fiber Type | Multimode (SX) |
| Maximum Data Rate | 1 Gbps |
| Network Standards | IEEE 802.3z, IEEE 802.3ab |
| Wavelength | 850 nm |
| Maximum Distance (Multimode) | Up to 550 m (OM2) |
| Dimensions (W x H x D) | 12 cm x 7 cm x 2 cm (estimated) |
| Weight | Approximately 50 g |
| Power Supply | Via PCIe bus |
| Power Consumption | < 3 W (typical) |
| Operating Temperature | 0 °C to 50 °C |
| Operating Humidity | 10 % to 90 % (non-condensing) |
| Included Components | Card, quick installation guide |
| Maintenance | Clean optical connectors with a specific kit |
| Safety | Avoid exposure to laser beam (Class 1) |
| Repairability | Spare parts available via Tripp Lite |
Frequently Asked Questions - N286-01G-SX-C Tripp Lite
Which operating systems are compatible with the N286-01G-SX-C?
The card is compatible with Windows Server, Linux, macOS and most distributions. Check the drivers on the Tripp Lite website.
How to install the Tripp Lite N286-01G-SX-C network card?
1. Turn off your computer and unplug it. 2. Open the case. 3. Insert the card into a free PCIe x1 slot. 4. Secure it with a screw. 5. Close the case. 6. Connect the LC fiber cable. 7. Turn on and install the drivers.
What is the maximum distance the signal can travel with this card?
With OM2 multimode fiber, the distance reaches 550 meters. With OM3, up to 300 m. With OM1, about 275 m.
Do I need to use a specific cable with the LC connector?
Yes, the connector is LC duplex. Use a multimode fiber cable with LC plugs on both ends.
How to check if the card is correctly recognized by the system?
In Windows, open Device Manager: the card should appear under 'Network adapters'. In Linux, use the command
lspci | grep Ethernet.What are the LED indicators on the card and their meaning?
The card has two LEDs: green for link and orange for activity. The green LED lit indicates an active link; it blinks during data transfer.
Can this card be used with a Gigabit fiber switch?
Yes, the card is designed for Gigabit Ethernet networks over multimode fiber. Make sure the switch has an SFP port or compatible LC connector.
How to clean the optical connectors on the card?
Use a fiber optic cleaning kit: a lint-free wipe with isopropyl alcohol, or a specific dry stick. Never touch the end of the fiber.
Does the card work in full-duplex?
Yes, it supports automatic full-duplex (auto-negotiation) for speeds up to 1 Gbps.
Where can I find updated drivers for my card?
Go to the official Tripp Lite website, 'Downloads' section. Enter the model N286-01G-SX-C and download the drivers for your OS.
User questions about N286-01G-SX-C Tripp Lite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network card / adapter in PDF format for free! Find your manual N286-01G-SX-C - Tripp Lite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. N286-01G-SX-C by Tripp Lite.
USER MANUAL N286-01G-SX-C Tripp Lite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Tripp Lite
Model : N286-01G-SX-C
Category : Network card / adapter