SV-1000.1 - Water heater KOSPEL - Free user manual and instructions
Find the device manual for free SV-1000.1 KOSPEL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Vertical electric storage water heater |
| Brand | Kospel |
| Model | SV-1000.1 |
| Capacity | 100 liters |
| Nominal power | 1500 W |
| Power supply | 230 V single-phase |
| Weight empty | 30 kg |
| Dimensions (height × diameter) | 800 × 500 mm |
| Tank material | Enameled steel |
| Anti-corrosion protection | Magnesium anode |
| Thermal insulation | Thick polyurethane foam |
| Temperature range | 30 °C to 75 °C |
| Electrical protection | IP24 |
| Safety group | Included (set at 7 bar) |
| Annual maintenance | Check anode and descaling |
| Repairability | Spare parts available (Kospel after-sales service) |
| Repairability index | 8/10 |
| Installation | Wall-mounted, cold and hot water connection |
Frequently Asked Questions - SV-1000.1 KOSPEL
What is the exact capacity of the Kospel SV-1000.1?
The SV-1000.1 model has a capacity of 100 liters, ideal for household needs of 2 to 3 people.
How to adjust the water temperature?
Turn the thermostat knob on the front to set the temperature between 30°C and 75°C. A temperature of 55°C is recommended for a good balance between comfort and energy savings.
Is it necessary to install a safety group?
Yes, a safety group is mandatory and supplied with the appliance. It must be installed on the cold water inlet to prevent overpressure.
How to maintain the magnesium anode?
The anode should be checked once a year. If it is heavily worn (diameter less than 10 mm), replace it to protect the tank from corrosion.
Can this water heater be installed outdoors?
No, the SV-1000.1 is designed for indoor use only. Its IP24 protection rating protects against water splashes, but not against weather conditions.
What is the electrical consumption?
With a power of 1500 W, consumption depends on usage. On average, expect about 2 to 3 kWh per day for a family of 3 people.
How to descale the appliance?
Empty the tank, then pour a special water heater descaler through the hot water connection. Let it act according to the product instructions, then rinse thoroughly before putting back into service.
What to do in case of a leak?
Immediately cut off the power supply and water inlet. Contact a qualified professional. Leaks can come from a worn seal or the tank itself.
Where to find spare parts?
Spare parts (anode, thermostat, heating element, etc.) are available from Kospel after-sales service or authorized dealers. Always use original parts.
How long does it take to heat the water?
The heating time for a temperature rise from 15°C to 60°C is approximately 3 hours with a power of 1500 W.
User questions about SV-1000.1 KOSPEL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual SV-1000.1 - KOSPEL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SV-1000.1 by KOSPEL.
USER MANUAL SV-1000.1 KOSPEL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KOSPEL
Model : SV-1000.1
Category : Water heater