Zephir 3.0 - Uncategorized uGo - Free user manual and instructions
Find the device manual for free Zephir 3.0 uGo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Electronic device |
| Brand | uGo |
| Model | Zephir 3.0 |
| Category | Uncategorized |
| Dimensions (L x W x H) | 25 x 20 x 15 cm |
| Weight | 0.8 kg |
| Power supply | Mains 220-240 V, 50 Hz |
| Power consumption | 30 W |
| Material | ABS plastic |
| Color | White |
| Screen | No |
| Main functions | Temperature control, programming |
| Remote control | Not included |
| Noise level | < 40 dB |
| Capacity | 1.5 L |
| Filter | Washable |
| Battery life | Not applicable (mains) |
| Maintenance and cleaning | Clean with a damp cloth |
| Safety | Automatic shutdown in case of overheating |
| Spare parts | Filter, resistance |
| Repairability | Repairability score 7/10 |
| Warranty | 2 years |
| General information | Made in China |
Frequently Asked Questions - Zephir 3.0 uGo
How to turn off the device?
Press the power button for 2 seconds until the device turns off. Then unplug the power cord.
What to do if the device does not turn on?
Check that the power cord is properly plugged in and that the outlet works. If the problem persists, refer to the Troubleshooting section of the manual.
How to clean the filter?
Remove the filter and clean it with warm soapy water. Rinse thoroughly and let dry completely before reinstalling. Do not use harsh detergents.
Can I use the device continuously?
Yes, the device is designed for continuous use. However, it is recommended to take a break every 8 hours to avoid overheating.
The device makes an abnormal noise, what should I do?
Immediately stop the device and check that nothing is blocking the ventilation openings. If the noise persists, contact customer service.
How to set a timer?
Press the Timer button and use the + and - keys to set the desired duration (from 1 to 12 hours). The device will turn off automatically.
Where to find the serial number?
The serial number is on the label under the device. It consists of 10 alphanumeric characters.
The device gets too hot, is this normal?
Slight heat is normal. If the device becomes burning to the touch, stop it immediately and check that the ventilation openings are not blocked. Contact customer service if the problem persists.
How to reset the device?
Unplug the device, wait 30 seconds, then plug it back in. Simultaneously press the + and - buttons for 5 seconds to reset to factory settings.
Can I order spare parts?
Yes, you can order spare parts such as the filter or resistance from our customer service. Refer to the Spare parts section of the manual for references.
User questions about Zephir 3.0 uGo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Zephir 3.0 - uGo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Zephir 3.0 by uGo.
USER MANUAL Zephir 3.0 uGo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : uGo
Model : Zephir 3.0
Category : Uncategorized