Audio Monitor 12G G3 - Audio Monitor Blackmagic Design - Free user manual and instructions
Find the device manual for free Audio Monitor 12G G3 Blackmagic Design in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Professional audio monitor |
| Brand | Blackmagic Design |
| Model | Audio Monitor 12G G3 |
| Dimensions (L x H x D) | 482 x 44 x 100 mm (19 inches, 1U rack) |
| Weight | 1.8 kg |
| Power supply | 100-240 V AC, 50/60 Hz, consumption 20 W |
| Audio connectivity | AES/EBU inputs and outputs, balanced analog on XLR |
| Supported signal | Up to 12G-SDI for embedded audio, PCM formats up to 24-bit/96 kHz |
| Display | Color LCD screen for metering and configuration |
| Headphone output | 6.35 mm jack with adjustable volume |
| Main functions | Audio monitoring with metering, source selection, attenuation, mute, solo, tone generator |
| Maintenance and cleaning | Clean with a soft dry cloth; avoid solvents |
| Operating temperature | 0°C to 40°C |
| Operating humidity | 20% to 80% non-condensing |
| Safety | Do not expose to moisture; disconnect before cleaning; use only with provided accessories |
| Spare parts and repairability | Repairable by a certified technician; parts available through after-sales service |
| General information | 1U rack audio monitor for studios and control rooms, compatible with SDI and analog |
| Warranty | 2 years (depending on country) |
| Box contents | Monitor, power cable, rack adapter, quick start guide |
| Standards | CE, FCC, RoHS |
Frequently Asked Questions - Audio Monitor 12G G3 Blackmagic Design
How do I connect my Audio Monitor 12G G3 to an AES/EBU network?
Use an XLR cable equipped for AES/EBU. Connect the source to the AES/EBU input of the monitor. Select the corresponding input via the front panel or menu.
Can I use this monitor with analog signals?
Yes, the Audio Monitor 12G G3 has balanced analog inputs on XLR. You can switch between analog and digital modes via the menu.
How do I update the firmware?
Download the latest firmware version from the Blackmagic Design website. Connect the monitor to your computer via the USB port (not provided) and follow the instructions in the Blackmagic Firmware Updater software.
What should I do if the screen shows nothing?
Check that the monitor is properly powered on. Make sure the HDMI or SDI cable is securely connected. If the problem persists, perform a factory reset via the menu.
How do I adjust the headphone output volume?
Use the dedicated volume knob on the front panel. To adjust the overall line output volume, use the setup menu.
What is the maximum SDI cable distance?
For a 12G-SDI signal, the maximum recommended distance is about 30 meters with a quality cable. For longer distances, use a repeater.
Can I use this monitor in a rack with other equipment?
Yes, the monitor occupies 1U in a 19-inch rack. It is supplied with mounting brackets. Ensure ventilation is not obstructed.
How do I clean the front panel?
Use a soft, dry cloth. Never use solvents or abrasive products. Disconnect the device before cleaning.
What should I do in case of overheating?
Check that the ventilation slots are not blocked. Reduce the ambient temperature or turn off the device for 30 minutes. If the problem persists, contact technical support.
Where can I find spare parts?
Contact Blackmagic Design after-sales service or an authorized dealer. Spare parts are available for repairs by a certified technician.
User questions about Audio Monitor 12G G3 Blackmagic Design
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio Monitor in PDF format for free! Find your manual Audio Monitor 12G G3 - Blackmagic Design and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Audio Monitor 12G G3 by Blackmagic Design.