TMX 2000 - Robot mower Texas - Free user manual and instructions
Find the device manual for free TMX 2000 Texas in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Robotic lawnmower |
| Brand | Texas |
| Model | TMX 2000 |
| Dimensions (L x W x H) | 59 x 45 x 29 cm |
| Weight | 12 kg |
| Power supply | Lithium-ion battery 24 V / 2.5 Ah |
| Runtime | 70 minutes |
| Charging time | 90 minutes |
| Maximum mowing area | 2000 m² |
| Maximum slope | 25% |
| Cutting width | 20 cm |
| Cutting height | 20 to 60 mm (adjustable) |
| Cutting system | Pivoting floating blade |
| Main functions | Weekly scheduling, automatic return to base, rain detection, collision sensors |
| Safety | Automatic stop when lifted, floating blade |
| Maintenance and cleaning | Regular cleaning of blades and wheels, sensor check |
| Spare parts available | Blades, batteries, wheels, charging station |
| Repairability | Estimated repairability score 8/10 |
| Warranty | 2 years |
Frequently Asked Questions - TMX 2000 Texas
How to install the Texas TMX 2000 robotic lawnmower?
First install the boundary wire following the provided plan. Place the charging station on a flat surface and plug it in. Program the lawnmower via the control panel. Refer to the manual for initial settings.
How to adjust the cutting height?
The cutting height is adjusted manually using the knobs located under the mower. Turn each knob to adjust from 20 to 60 mm. Make sure both sides are at the same height.
What to do if the mower does not return to its base?
Check that the boundary wire is not damaged and that the charging station is powered. Clean the charging contacts. If the problem persists, perform a reset of the device.
How to clean the robotic lawnmower?
Turn off the mower and remove the battery. Use a soft brush to remove grass and debris. Clean the blades with a damp cloth. Check the wheels and sensors. Never use a water jet.
What is the battery runtime?
The runtime is approximately 70 minutes under normal conditions. The battery recharges automatically when the mower returns to its base. The full charging cycle takes about 90 minutes.
Can I program multiple mowing zones?
Yes, the mower can manage multiple zones by installing sections of boundary wire. Use the scheduling mode to set work periods per zone.
How to replace the blades?
Disconnect the battery. Turn the mower over and unscrew the central blade screw. Replace it with a new blade (ref. Texas Blade TMX2000). Tighten firmly. Wear protective gloves.
What to do if the mower gets stuck?
The mower detects obstacles and changes direction. If it gets stuck, remove the obstacle or straighten it. Check that the wheels are not clogged. Refer to the troubleshooting section of the manual.
Does the mower work in the rain?
The mower is equipped with a rain sensor. In case of rain, it automatically returns to its base for protection. It is recommended not to use it in heavy weather.
How to store the mower in winter?
Clean it thoroughly, remove the battery and store it in a dry, frost-free place. Recharge the battery to 50% every 3 months. Protect the mower with a cover. See the winter storage guide.
User questions about TMX 2000 Texas
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Robot mower in PDF format for free! Find your manual TMX 2000 - Texas and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TMX 2000 by Texas.