PSR-SCP-24DC/TS/S - Uncategorized Phoenix Contact - Free user manual and instructions
Find the device manual for free PSR-SCP-24DC/TS/S Phoenix Contact in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Monostable safety relay |
| Brand | Phoenix Contact |
| Model | PSR-SCP-24DC/TS/S |
| Rated supply voltage | 24 V DC |
| Supply voltage range | 19.2 V DC to 30 V DC |
| Typical supply current | 50 mA |
| Number of contacts | 2 safety contacts (N.O.), 1 auxiliary contact (N.C.) |
| Maximum contact current | 6 A |
| Maximum contact voltage | 250 V AC / 24 V DC |
| Dimensions (W x H x D) | 12.5 mm x 114.5 mm x 106 mm |
| Weight | Approx. 120 g |
| Connection type | Screw terminals |
| Connectable conductor cross-section | 0.2 mm² to 2.5 mm² |
| Operating temperature | -25 °C to +55 °C |
| Main functions | Emergency stop monitoring, light curtain protection, safety contactor control |
| Maintenance and cleaning | Clean with a dry cloth; periodically check connections |
| Protection rating | IP20 |
| Certifications | CE, UL, SIL 3 according to IEC 62061 |
Frequently Asked Questions - PSR-SCP-24DC/TS/S Phoenix Contact
What is the supply voltage of the PSR-SCP-24DC/TS/S ?
The rated supply voltage is 24 V DC, with a range of 19.2 V DC to 30 V DC.
How to wire the safety relay?
Use screw terminals. Connect the power supply (A1/A2), safety contacts (13/14, 23/24) and auxiliary contact (31/32). Follow the diagram in the manual.
What is the function of the auxiliary contact?
The auxiliary contact (NC) indicates the relay status: it is closed when the relay is active and open in case of fault.
Can this relay be used with light curtains?
Yes, it is designed for monitoring light curtains and emergency stops, with redundancy and dynamic testing.
What is the maximum conductor cross-section?
The connectable cross-section is 0.2 mm² to 2.5 mm² with or without ferrules.
How to reset the relay after a fault?
Turn off and then restore the power supply. If the fault persists, check the wiring and the safety inputs.
Does the relay support an inductive load?
Yes, for inductive loads such as contactors, provide a freewheeling diode across the coil.
What safety level is achieved?
This relay is certified SIL 3 according to IEC 62061 and category 4 according to EN 954-1.
Where can I find the detailed wiring diagram?
The diagram is provided in the user manual downloadable on the product page.
How to test the relay without equipment?
Simulate a fault by opening the safety input: the relay should deactivate and the auxiliary contact open. Return the input to the safe state to reactivate.
User questions about PSR-SCP-24DC/TS/S Phoenix Contact
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual PSR-SCP-24DC/TS/S - Phoenix Contact and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PSR-SCP-24DC/TS/S by Phoenix Contact.
USER MANUAL PSR-SCP-24DC/TS/S Phoenix Contact
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Phoenix Contact
Model : PSR-SCP-24DC/TS/S
Category : Uncategorized