Decade DA4002 - Receiver JBL - Free user manual and instructions
Find the device manual for free Decade DA4002 JBL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Receiver |
| Brand | JBL |
| Model | Decade DA4002 |
| Dimensions (W x H x D) | Approx. 17.5 x 5.5 x 13.5 inches (445 x 140 x 345 mm) |
| Weight | Approx. 24 lbs (11 kg) |
| Power Output | 60 watts per channel into 8 ohms (RMS, both channels driven) |
| Total Harmonic Distortion | < 0.02% at rated power |
| Frequency Response | 20 Hz - 20 kHz ±0.5 dB |
| Signal-to-Noise Ratio | 85 dB (Phono), 95 dB (Aux/Tuner) |
| Inputs | Phono (MM), Tuner, Aux, 2 Tape |
| Outputs | Speaker A/B, Headphone (1/4"), Pre-out, Tape Rec |
| Tuning Range | FM: 88-108 MHz, AM: 530-1710 kHz |
| FM Sensitivity | 2.5 μV (IHF) |
| Power Consumption | 250 W maximum |
| Power Supply | AC 120V / 240V switchable, 50/60 Hz |
| Chassis Construction | Ventilated metal casing with alcove styling |
| Cleaning Instructions | Wipe with a soft dry cloth. Do not use solvents or abrasive cleaners. |
| Safety Warnings | Place on a stable surface. Avoid moisture, heat sources, and restricted ventilation. |
| Spare Parts & Repairability | Contact an authorized JBL service center. Refer user manual for part numbers. |
Frequently Asked Questions - Decade DA4002 JBL
How do I connect my turntable to the JBL Decade DA4002?
Connect your turntable's audio cables to the Phono input. Ensure your turntable has a moving magnet (MM) cartridge and ground wire; connect the ground wire to the GND terminal on the receiver.
What is the recommended speaker impedance for this receiver?
The JBL Decade DA4002 is designed for speakers with an impedance of 8 ohms. You can also use 4 ohm speakers, but the power output will be slightly reduced.
How do I adjust the FM tuning?
Use the FM/AM selector to choose FM, then turn the Tuning knob to your desired station. For best reception, adjust the included FM antenna or connect an external one.
No sound from speakers. What should I check?
First, check that the Speaker A or B switch is pressed. Ensure the volume is up and the correct input is selected. Also verify speaker wire connections and that no headphones are plugged in (which mutes speakers).
How do I clean the front panel and casing?
Use a soft, lint-free cloth slightly dampened with water. Never use alcohol, ammonia, or abrasive cleaners. Wipe gently and avoid getting moisture into the ventilation slots.
Can I connect a subwoofer to this receiver?
The DA4002 does not have a dedicated subwoofer output. You can connect a powered subwoofer using the Tape Rec outputs or speaker-level inputs on the subwoofer.
What is the maximum power consumption in watts?
The maximum power consumption is 250 watts. For normal listening levels, it typically draws less.
How do I switch between normal and bi-wired speakers?
This receiver does not support bi-wiring directly. Use only standard speaker connections. If you need bi-wiring, add an external crossover with dedicated amplifier.
The FM reception is weak. How can I improve it?
Try repositioning the included FM dipole antenna for best signal. For stronger reception, connect an outdoor FM antenna or use a FM signal booster.
What type of headphones can I use?
Use headphones with a 1/4-inch (6.35 mm) stereo plug. Impedance between 32 and 600 ohms is recommended for optimal volume and sound quality.
User questions about Decade DA4002 JBL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Decade DA4002 - JBL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Decade DA4002 by JBL.
USER MANUAL Decade DA4002 JBL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JBL
Model : Decade DA4002
Category : Receiver