Marine MA6002 - Receiver JBL - Free user manual and instructions
Find the device manual for free Marine MA6002 JBL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Marine Amplifier |
| Brand | JBL |
| Model | Marine MA6002 |
| Channels | 2 |
| Power Output (RMS) | 2 x 150W @ 4 ohms, 2 x 300W @ 2 ohms |
| Frequency Response | 10 Hz - 30 kHz |
| Signal-to-Noise Ratio | > 95 dB |
| Dimensions (W x H x D) | 10.2 x 2.1 x 7.5 inches |
| Weight | 6.5 lbs |
| Power Supply | 12 V DC |
| Input Sensitivity | 200 mV - 4 V |
| Crossover | Variable high-pass/low-pass (50 Hz - 250 Hz) |
| Bass Boost | 0 - 12 dB @ 45 Hz |
| Remote Control | Remote level control included |
| Protection Circuitry | Thermal, overcurrent, DC offset |
| Water Resistance | IPX5 (splash-proof) |
| Connectors | Gold-plated RCA inputs, screw terminals for speakers |
| Fuse Rating | 30 A (AGC type) |
| Maintenance | Wipe with damp cloth; avoid saltwater exposure |
| Installation | Mount in dry, ventilated area; secure with supplied hardware |
Frequently Asked Questions - Marine MA6002 JBL
What is the power output of the JBL Marine MA6002?
The MA6002 delivers 150 watts RMS per channel at 4 ohms and 300 watts RMS per channel at 2 ohms.
What type of power supply does this amplifier require?
It requires a 12-volt DC power source, typically from a marine battery.
Can I bridge the channels on the MA6002?
Yes, it can be bridged to deliver 600 watts RMS into a 4-ohm load.
Is the MA6002 waterproof?
It has an IPX5 splash-proof rating, meaning it can withstand water splashes but should not be submerged.
What is the recommended speaker impedance?
It is stable into 2-ohm loads per channel and 4-ohm in bridged mode.
Does it include a remote control?
Yes, a remote level control is included for easy adjustment.
How do I install the fuse?
The amplifier uses a 30A AGC fuse. Install it within 18 inches of the battery for protection.
What is the crossover range?
Variable high-pass and low-pass crossover from 50 Hz to 250 Hz.
Can I use this amplifier with a factory radio?
Yes, the input sensitivity accepts 200 mV to 4 V, compatible with most head units.
What maintenance is needed?
Regularly wipe the amplifier with a damp cloth to remove salt and dirt. Avoid harsh chemicals.
User questions about Marine MA6002 JBL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Marine MA6002 - JBL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Marine MA6002 by JBL.
USER MANUAL Marine MA6002 JBL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JBL
Model : Marine MA6002
Category : Receiver