Power BPx1100.1 - Receiver JBL - Free user manual and instructions
Find the device manual for free Power BPx1100.1 JBL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Mono Subwoofer Amplifier |
| Brand | JBL |
| Model | Power BPx1100.1 |
| Amplifier Class | Class D |
| Number of Channels | 1 |
| RMS Power (4 ohms) | 700W |
| RMS Power (2 ohms) | 1100W |
| Frequency Response | 10 Hz - 250 Hz |
| Signal-to-Noise Ratio | >100 dB |
| Variable Low-Pass Filter | 40 Hz - 250 Hz |
| Subsonic Filter | 20 Hz (fixed) |
| Bass Boost | 0 - 12 dB at 45 Hz |
| Remote Level Control | Included (wired) |
| Input Sensitivity | 200 mV - 6 V |
| Power Supply | 12V DC (vehicle battery) |
| Fuse Rating | 2 x 30A (AGU) |
| Dimensions (W x H x D) | 12.5 x 2.2 x 9.5 inches (312 x 55 x 240 mm) |
| Weight | 6.5 lbs (2.95 kg) |
| Protection Features | Thermal, Short Circuit, Overload |
| Cooling | Convection (heat sink) |
| Cleaning | Use dry cloth; avoid liquids |
| Spare Parts | Fuses, Remote control (optional) |
| Repairability | Professional service recommended |
Frequently Asked Questions - Power BPx1100.1 JBL
What is the RMS power output of the JBL Power BPx1100.1 at 2 ohms?
The amplifier delivers 1100W RMS at 2 ohms.
Can I bridge the JBL Power BPx1100.1?
No, this is a mono amplifier designed for a single subwoofer; bridging is not applicable.
What type of fuse does the JBL Power BPx1100.1 use?
It uses 2 x 30A AGU fuses.
Does the amplifier include a remote bass control?
Yes, a wired remote level control is included for bass adjustment.
What is the minimum impedance load?
The amplifier is stable down to 2 ohms.
How do I set the input sensitivity?
Use the gain control on the amplifier, adjusting with a multimeter or by ear to match the head unit.
What is the subsonic filter frequency?
The fixed subsonic filter is set at 20 Hz to protect the subwoofer from ultra-low frequencies.
Can I install the amplifier in a wet environment?
No, the amplifier is not water-resistant; install it in a dry, ventilated area.
What gauge power wire should I use?
Use 4 AWG power and ground wire for optimal performance.
How do I clean the amplifier?
Wipe the exterior with a soft, dry cloth. Avoid using liquids or cleaners.
User questions about Power BPx1100.1 JBL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Power BPx1100.1 - JBL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Power BPx1100.1 by JBL.
USER MANUAL Power BPx1100.1 JBL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JBL
Model : Power BPx1100.1
Category : Receiver