VB 50/1500 B - Water pump Elpumps - Free user manual and instructions
Find the device manual for free VB 50/1500 B Elpumps in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Submersible Water Pump |
| Brand | Elpumps |
| Model | VB 50/1500 B |
| Power | 1500 W |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Max Flow Rate | 50 L/min |
| Max Head | 15 m |
| Inlet Size | 1 inch |
| Outlet Size | 1 inch |
| Protection Class | IP68 |
| Cable Length | 10 m |
| Weight | 10 kg |
| Dimensions (L x W x H) | 200 x 200 x 400 mm |
| Material | Stainless Steel |
| Type | Submersible |
Frequently Asked Questions - VB 50/1500 B Elpumps
How do I install the Elpumps VB 50/1500 B?
Ensure the pump is fully submerged in water before starting. Connect the outlet hose to the discharge port. Plug into a grounded outlet. The pump will start automatically when water level rises above the float switch.
What is the maximum depth of submersion?
The maximum submersion depth is 10 meters. Do not exceed this to avoid damage.
Can the pump run dry?
No, the pump must never run dry. It requires water for cooling and lubrication. Running dry can cause overheating and permanent damage.
How do I clean the pump?
Disconnect power before cleaning. Use a soft brush to remove debris from the intake screen. Rinse with clean water. Do not use harsh chemicals.
What should I do if the pump doesn't start?
Check power supply, fuse, and float switch position. Ensure the pump is fully submerged. If still not working, consult the troubleshooting section in the manual.
How often should I replace the carbon brushes?
Carbon brushes should be inspected after every 1000 hours of operation. Replace if worn down to less than 6 mm.
Is the pump suitable for saltwater?
No, this pump is designed for clean water only. Saltwater will cause corrosion and damage.
What is the minimum water level required?
The minimum water level for operation is 50 mm from the pump base. Below this, the pump may suck air and run dry.
Can I use an extension cord?
Yes, but use a cord with sufficient gauge (minimum 1.5 mm²) and keep it as short as possible to avoid voltage drop.
Where can I find spare parts?
Spare parts are available through authorized Elpumps dealers. Contact customer service with your model number for assistance.
User questions about VB 50/1500 B Elpumps
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water pump in PDF format for free! Find your manual VB 50/1500 B - Elpumps and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VB 50/1500 B by Elpumps.
USER MANUAL VB 50/1500 B Elpumps
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Elpumps
Model : VB 50/1500 B
Category : Water pump