FGC 100 - Uncategorized Fischer - Free user manual and instructions
Find the device manual for free FGC 100 Fischer in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Hot glue gun |
| Brand | Fischer |
| Model | FGC 100 |
| Power | 100 W |
| Supply voltage | 230 V, 50/60 Hz |
| Heating temperature | 200 °C |
| Glue stick diameter | 11 mm |
| Glue flow rate | 20 g/min |
| Preheating time | 3 to 5 minutes |
| Cable length | 1.5 m |
| Dimensions (L x W x H) | 200 x 150 x 50 mm |
| Weight | 350 g |
| Housing material | Robust plastic |
| Main functions | Progressive trigger, integrated stand, on/off switch |
| Safety | Automatic shut-off in case of overheating, anti-drip nozzle |
| Maintenance and cleaning | Clean the nozzle with a damp cloth after cooling |
| Spare parts and repairability | Replacement nozzle, heating element available |
Frequently Asked Questions - FGC 100 Fischer
What type of glue should be used with the Fischer FGC 100?
Use hot glue sticks with a diameter of 11 mm, standard for glue guns. Prefer Fischer brand sticks for optimal compatibility.
How long does it take for the gun to heat up?
The preheating time is approximately 3 to 5 minutes. An indicator light shows that the operating temperature is reached.
Can the gun be used on fabric?
Yes, with special glue sticks for fabric. Make sure the fabric can withstand heat (200 °C). Test on a sample.
How to clean the gun after use?
Let it cool completely, then wipe the nozzle with a damp cloth. Do not use solvents. Remove dried glue residue by heating slightly.
What to do if the glue does not flow?
Check that the glue stick is properly inserted and the gun is hot enough. If the problem persists, clean the nozzle or replace the heating element.
Does the gun have anti-drip safety?
Yes, the nozzle is designed to reduce drips after use. However, always place the gun on its stand when hot.
Can I use glue sticks of different colors?
Yes, as long as the diameter is 11 mm. Colored sticks have the same thermal properties. Be careful not to mix different types of glue.
How to change the gun nozzle?
Unplug the device, let it cool. Unscrew the nozzle using a suitable wrench (not included). Replace with a new nozzle and screw back on.
Can the gun stay plugged in for a long time?
It is designed for intermittent use. Do not leave it plugged in unattended. Turn it off after use to save energy and extend its lifespan.
Where to find spare parts for the FGC 100?
Spare parts (nozzles, heating elements) are available from Fischer’s after-sales service or authorized dealers. Check the manual for references.
User questions about FGC 100 Fischer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual FGC 100 - Fischer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FGC 100 by Fischer.
USER MANUAL FGC 100 Fischer
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Fischer
Model : FGC 100
Category : Uncategorized