FIS EM Plus 1500 S - Uncategorized Fischer - Free user manual and instructions
Find the device manual for free FIS EM Plus 1500 S Fischer in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Demolition Hammer |
| Brand | Fischer |
| Model | FIS EM Plus 1500 S |
| Power | 1500 W |
| Voltage | 230 V |
| Frequency | 50/60 Hz |
| Impact Energy | 50 J |
| No-Load Speed | 1700 min⁻¹ |
| Impact Rate | 3200 min⁻¹ |
| Tool Holder | SDS-max |
| Weight | 12.5 kg |
| Dimensions (L x W x H) | 500 x 120 x 250 mm |
| Cable Length | 3 m |
| Protection Class | IP20 |
| Safety Features | Overload protection, Vibration damping |
| Functions | Chiseling, Breaking, Flat chisel, Point chisel |
| Maintenance | Regular lubrication, Carbon brush inspection |
| Supplied Accessories | Point chisel, flat chisel, grease, tool case |
Frequently Asked Questions - FIS EM Plus 1500 S Fischer
How do I change the chisel on the Fischer FIS EM Plus 1500 S?
To change the chisel, first unplug the tool. Use the SDS-max key to push and turn the tool holder until it releases. Insert the new chisel and lock it by turning back. Ensure it is securely seated before use.
What type of grease should I use for lubrication?
Use Fischer special grease for demolition hammers. Apply a small amount to the shank of the chisel before each use to ensure smooth operation and reduce wear.
How do I check the carbon brushes?
Unplug the tool and locate the carbon brush caps on the motor housing. Use a screwdriver to remove the caps and pull out the brushes. If they are shorter than 6mm, replace them with original Fischer brushes.
What should I do if the hammer stops working during use?
First, check if the overload protection has tripped. Let the tool cool down for 15 minutes, then press the reset button. Also verify the power supply and cable integrity.
Can I use the FIS EM Plus 1500 S for drilling?
No, this tool is designed exclusively for breaking and chiseling. It is not suitable for drilling holes. Using it for drilling may cause damage and injury.
What is the vibration level of this hammer?
The typical vibration emission value is 15 m/s² (hand-arm vibration). Always wear anti-vibration gloves and take breaks to reduce exposure.
How do I clean the demolition hammer?
Wipe the exterior with a damp cloth and remove dust from vents with a soft brush. Do not use water or solvents. Keep the tool dry and store in a clean environment.
Is the Fischer FIS EM Plus 1500 S suitable for concrete work?
Yes, it is ideal for breaking concrete, masonry, and stone. Use the appropriate chisel for the material. For reinforced concrete, a pointed chisel is recommended.
What is the warranty period for this product?
Fischer offers a 2-year warranty from the date of purchase. Register your product online to activate the warranty. Keep the receipt as proof.
Where can I purchase spare parts and accessories?
Spare parts are available from authorized Fischer dealers and service centers. Visit the Fischer website to find a local distributor or order online using the part number.
User questions about FIS EM Plus 1500 S Fischer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual FIS EM Plus 1500 S - Fischer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FIS EM Plus 1500 S by Fischer.
USER MANUAL FIS EM Plus 1500 S Fischer
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Fischer
Model : FIS EM Plus 1500 S
Category : Uncategorized