SBS-PF-150/20N - Scale STEINBERG - Free user manual and instructions
Find the device manual for free SBS-PF-150/20N STEINBERG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Floor / platform scale |
| Brand | Steinberg |
| Model | SBS-PF-150/20N |
| Maximum capacity | 150 kg |
| Precision (division) | 20 g |
| Units of measurement | kg, lb, st (depending on version) |
| Weighing platform | Stainless steel |
| Platform dimensions | Approximately 30 x 30 cm |
| Scale dimensions | Approximately 33 x 33 x 5 cm |
| Net weight | Approximately 2.5 kg |
| Power supply | 2 AAA batteries (not included) |
| Main functions | Zero setting, tare, auto-off, overload indicator |
| Display | LCD, backlit (depending on version) |
| Intended use | Domestic or light professional weighing |
| Care and cleaning | Clean with a damp cloth, avoid abrasive products |
| Safety | Do not exceed maximum load; avoid shocks |
| Spare parts and repairability | Standard batteries; other parts available upon request from customer service |
| Warranty | 2 years (subject to conditions) |
| Package contents | Scale, user manual |
Frequently Asked Questions - SBS-PF-150/20N STEINBERG
How to turn the Steinberg SBS-PF-150/20N scale on and off?
Press the ON/OFF button located on the side or front. The scale turns off automatically after a few seconds of inactivity.
What type of batteries to use and how to replace them?
Use two AAA batteries (LR03). Open the compartment on the back, insert the batteries respecting polarity, then close.
How to change the unit of measurement (kg/lb/st)?
Press the UNIT (or MODE) button to switch between kilograms, pounds, and stones. The active unit is shown on the display.
What to do if the display shows 'Err' or 'O-Ld'?
'Err' indicates a weighing error (unstable or too light object). 'O-Ld' means overload: immediately remove the weight to avoid damaging the scale.
How to use the tare function?
Place an empty container on the scale, press TARE (or ZERO) to reset the display to zero, then add the ingredient. The net weight is displayed.
The scale seems inaccurate, how to calibrate it?
Place the scale on a flat, hard surface. Turn it on, then press and hold the MODE button for 3 seconds until 'CAL' flashes. Place a known reference weight (e.g., 10 kg) and wait for stabilization. Refer to the manual for recommended weights.
What is the maximum capacity of the scale?
The maximum capacity is 150 kg. Never exceed this limit to avoid damaging the sensors.
How to clean the scale?
Remove the batteries. Clean the platform with a soft, slightly damp cloth. Do not use chemical or abrasive cleaners. Dry thoroughly.
The scale does not turn on, what to check?
Check that the batteries are correctly installed and not depleted. If the problem persists, try new batteries. Make sure the compartment is clean.
Is the scale under warranty?
Yes, the Steinberg SBS-PF-150/20N scale is warranted 2 years against manufacturing defects. Keep the proof of purchase for any claims.
User questions about SBS-PF-150/20N STEINBERG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Scale in PDF format for free! Find your manual SBS-PF-150/20N - STEINBERG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SBS-PF-150/20N by STEINBERG.
USER MANUAL SBS-PF-150/20N STEINBERG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : STEINBERG
Model : SBS-PF-150/20N
Category : Scale