SBS-LW-300HWA2 - Scale STEINBERG - Free user manual and instructions
Find the device manual for free SBS-LW-300HWA2 STEINBERG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Kitchen scale |
| Brand | Steinberg |
| Model | SBS-LW-300HWA2 |
| Maximum capacity | 5 kg |
| Precision | 1 g |
| Measurement units | g, kg, lb, oz |
| Dimensions (L x W x H) | 20 x 15 x 3 cm |
| Net weight | 300 g |
| Platform material | Tempered glass |
| Housing material | ABS plastic |
| Power type | CR2032 battery (included) |
| Display | LCD screen |
| Main functions | Weighing, zero (tare), unit conversion |
| Automatic shutdown | Yes, after 60 seconds of inactivity |
| Non-slip surface | Yes, rubber feet |
| Maintenance and cleaning | Wipe with a damp cloth; do not immerse |
| Safety | Do not overload beyond 5 kg; household use only |
| Spare parts | CR2032 batteries available commercially |
| Repairability | Not user-serviceable; contact Steinberg customer service |
| Warranty | 2 years |
Frequently Asked Questions - SBS-LW-300HWA2 STEINBERG
How to turn on the Steinberg SBS-LW-300HWA2 scale?
Briefly press the ON/TARE button located on the front of the scale. The screen lights up and displays 0.0 after a few seconds.
How to use the tare function?
Place an empty container on the scale, then press the TARE button. The screen resets to zero. Add the ingredient, and the net weight is displayed.
How to change the measurement unit?
Press the UNIT/MODE button to switch between grams (g), kilograms (kg), pounds (lb), and ounces (oz). The selected unit is displayed on the screen.
What to do if the scale displays 'Err' or 'Lo'?
'Err' indicates an overload: remove excess weight. 'Lo' means low battery: replace the CR2032 battery.
What is the maximum capacity of this scale?
The maximum capacity is 5 kg (11 lb). Do not exceed this limit to avoid damaging the sensor.
How to clean the scale?
Use a slightly damp soft cloth. Never immerse the scale in water and avoid abrasive products. Dry it immediately after cleaning.
The scale turns off by itself, is that normal?
Yes, the automatic shutdown activates after about 60 seconds of inactivity to save battery.
What type of battery to use and how to replace it?
Use a CR2032 lithium battery. Open the compartment on the back of the scale with a screwdriver, remove the old battery and insert the new one respecting polarity (+/-).
The scale is not accurate, what to do?
Place the scale on a flat, hard surface. Make sure it is level. If the problem persists, calibrate it following the procedure in the manual (usually by holding the ON/TARE button for a few seconds).
Where to find the full manual?
The full manual is available for free download at notice-facile.com. Go to the product page and click 'Download'.
User questions about SBS-LW-300HWA2 STEINBERG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Scale in PDF format for free! Find your manual SBS-LW-300HWA2 - STEINBERG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SBS-LW-300HWA2 by STEINBERG.
USER MANUAL SBS-LW-300HWA2 STEINBERG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : STEINBERG
Model : SBS-LW-300HWA2
Category : Scale