WIE-PM-4500 - Uncategorized Wiesenfield - Free user manual and instructions
Find the device manual for free WIE-PM-4500 Wiesenfield in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Multifunction device |
| Brand | Wiesenfield |
| Model | WIE-PM-4500 |
| Dimensions (L x W x H) | 45 cm x 30 cm x 20 cm |
| Weight | 4.5 kg |
| Power supply | 220-240 V, 50 Hz |
| Power consumption | 500 W |
| Housing material | Painted steel and ABS plastic |
| Main functions | Cutting, drilling, polishing |
| Rotation speed | 0-3000 rpm (variable) |
| Max. cutting capacity | 50 mm (wood), 5 mm (steel) |
| Maintenance and cleaning | Clean with a soft, dry cloth. Do not use abrasive products. |
| Safety instructions | Wear protective goggles. Unplug before any maintenance. |
| Spare parts available | Yes, upon request from customer service |
| Repairability | Repairability index: 7.5/10 |
| Warranty | 2 years |
Frequently Asked Questions - WIE-PM-4500 Wiesenfield
How to install the device?
Place the device on a stable, flat surface. Plug the power cord into a 220-240 V outlet. Make sure the switch is in the off position before plugging in.
What type of oil to use for lubrication?
Use a light non-detergent machine oil. Apply a few drops to the moving parts after each intensive use.
How to change the cutting blade?
Unplug the device. Loosen the fixing screw, remove the old blade, insert the new one respecting the direction of rotation, then tighten the screw.
The device does not start, what to do?
Check the connection, the condition of the cable and the fuse. If the problem persists, contact Wiesenfield customer service.
What is the maximum cutting depth?
The maximum cutting depth is 50 mm in wood and 5 mm in steel.
How to clean the device after use?
Unplug the device. Use a slightly damp soft cloth to wipe the surface. Never immerse the device in water.
Can I use the device continuously for several hours?
It is recommended to take a break every 30 minutes to avoid overheating. The motor is thermally protected.
Where to find spare parts?
Spare parts are available upon request from Wiesenfield customer service or on the official website.
How to adjust the speed?
Turn the speed variator on the handle to adjust the rotation from 0 to 3000 rpm.
What accessories are included?
The device comes with a cutting blade, a drill chuck, an adjustment key, and an instruction manual.
User questions about WIE-PM-4500 Wiesenfield
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual WIE-PM-4500 - Wiesenfield and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WIE-PM-4500 by Wiesenfield.
USER MANUAL WIE-PM-4500 Wiesenfield
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Wiesenfield
Model : WIE-PM-4500
Category : Uncategorized