WIE-MM-100 - Uncategorized Wiesenfield - Free user manual and instructions
Find the device manual for free WIE-MM-100 Wiesenfield in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Lightweight tiller |
| Brand | Wiesenfield |
| Model | WIE-MM-100 |
| Dimensions (L x W x H) | 100 x 50 x 80 cm |
| Weight | 30 kg |
| Engine type | 4-stroke petrol |
| Engine power | 5 HP (3.7 kW) |
| Tank capacity | 1.5 L |
| Working width | 50 cm |
| Working depth | Up to 20 cm |
| Number of blades | 4 pairs (8 blades) |
| Main functions | Ploughing, tilling, weeding, soil aeration |
| Maintenance and cleaning | Clean after use, check and change engine oil, sharpen or replace blades, clean air filter |
| Safety instructions | Wear gloves and safety goggles, stop engine before any maintenance, do not use on steep slopes |
| Spare parts | Tilling blades, drive belt, spark plug, air filter |
| Repairability | Parts available, maintenance possible by knowledgeable individual |
| Warranty | 2 years |
Frequently Asked Questions - WIE-MM-100 Wiesenfield
What type of engine oil should I use for the WIE-MM-100?
Use a quality SAE 30 or 10W-30 engine oil for 4-stroke engines. Check the level before each use and change it every 20 hours of operation.
How do I start the Wiesenfield WIE-MM-100 tiller?
Make sure the tank contains unleaded petrol, the emergency stop is in the on position, then pull the starter cord firmly after opening the fuel tap and closing the choke if the engine is cold.
The machine is not ploughing properly, what should I do?
Check that the blades are not blunt or clogged. Clean them and sharpen them if necessary. Also ensure that the working depth is correctly adjusted.
How do I adjust the ploughing depth?
Use the adjustment pin located on the drawbar. By moving it into the holes, you can adjust the working depth from 5 to 20 cm.
What safety precautions should I take when using it?
Always wear closed-toe shoes, gloves, and safety goggles. Never put your hands or feet near the rotating blades. Stop the engine before any adjustment or cleaning.
The engine does not start, possible causes?
Check the fuel level, condition of the spark plug, air filter, and make sure the fuel valve is open. If the engine is flooded, wait a few minutes before trying again.
What is the working width of the WIE-MM-100?
The working width is 50 cm, allowing you to cover a significant area quickly.
How do I properly maintain the tiller?
Clean it after each use, check oil levels, tighten bolts, lubricate moving parts, and store it in a dry place.
Where can I find spare parts for the WIE-MM-100?
You can order spare parts directly from Wiesenfield or from authorized dealers. Blades, belts, and spark plugs are readily available.
Is the WIE-MM-100 suitable for clay soils?
Yes, thanks to its 5 HP power and robust blades, it can work in moderately hard clay soils. For very hard soils, it is advisable to go over several times.
User questions about WIE-MM-100 Wiesenfield
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual WIE-MM-100 - Wiesenfield and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WIE-MM-100 by Wiesenfield.
USER MANUAL WIE-MM-100 Wiesenfield
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Wiesenfield
Model : WIE-MM-100
Category : Uncategorized