DPH-03 - Uncategorized MSW - Free user manual and instructions
Find the device manual for free DPH-03 MSW in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Rotary hammer |
| Brand | MSW |
| Model | DPH-03 |
| Supply voltage | 230 V / 50 Hz |
| Power consumption | 1500 W |
| No-load speed (speed 1) | 0 - 900 rpm |
| No-load speed (speed 2) | 0 - 1800 rpm |
| Impact rate | 0 - 4500 blows/min |
| Impact energy | 5 J |
| Drilling capacity (concrete) | 32 mm |
| Drilling capacity (steel) | 13 mm |
| Drilling capacity (wood) | 40 mm |
| Tool holder | SDS-Plus |
| Dimensions (L x W x H) | 410 x 100 x 280 mm |
| Weight | 5.2 kg |
| Sound level (LpA) | 95 dB(A) |
| Vibration level (drilling) | 15 m/s² |
| Main functions | Drilling, hammering, chiseling, reverse rotation |
| Maintenance and cleaning | Clean ventilation slots, replace carbon brushes, grease tool holder |
| Safety | Safety clutch, lockable switch, dust cover |
| Spare parts and repairability | Carbon brushes, tool holder, switch, power cord |
| General information | Protection class II, double insulation |
Frequently Asked Questions - DPH-03 MSW
How to change the chuck of the DPH-03?
To change the SDS-Plus chuck, use a special key (not supplied) or press the unlocking ring. Refer to the manual for disassembly details.
The hammer drill does not start, what to do?
First check the power supply and fuse. Then test the on/off button and the switch lock. If the problem persists, the carbon brushes may be worn.
What is the maximum drilling depth in concrete?
With the DPH-03, you can drill up to 32 mm diameter in concrete. Use suitable drill bits and hammer mode for better results.
How to adjust speed and impact?
The speed selector allows you to choose between 2 speeds (900 and 1800 rpm). The impact is activated via a switch. Adjust the setting to the material being drilled.
The tool heats up abnormally, is it normal?
Moderate heating during intensive use is normal. If the temperature becomes excessive, stop the device, clean the ventilation slots and let it cool. Regular maintenance prevents overheating.
Can I use the DPH-03 as a chisel?
Yes, the DPH-03 has a chiseling mode with stopped rotation. Insert an SDS-Plus chisel and select the appropriate mode. Always wear protective equipment.
How to replace the carbon brushes?
Unplug the device. Remove the caps from the carbon brush holders on the sides, extract the worn brushes and insert new ones. Replace the caps. Use original carbon brushes.
What type of oil to use for the tool holder grease?
Use a special grease for SDS-Plus tools, available at hardware stores. Apply a small amount to the tool holder before each prolonged use to lubricate and protect.
Does the DPH-03 have a variable speed control?
Yes, the trigger switch allows electronic speed variation depending on the pressure applied. This facilitates precision drilling.
How to clean the hammer drill after use?
Unplug the device. Wipe the housing with a damp cloth, blow dust from the ventilation slots with compressed air. Do not use aggressive solvents.
User questions about DPH-03 MSW
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DPH-03 - MSW and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DPH-03 by MSW.
USER MANUAL DPH-03 MSW
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MSW
Model : DPH-03
Category : Uncategorized