CA-0003A - Uncategorized MSW - Free user manual and instructions
Find the device manual for free CA-0003A MSW in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Circular saw |
| Brand | MSW |
| Model | CA-0003A |
| Dimensions (L x W x H) | 500 x 300 x 250 mm |
| Weight | 5.2 kg |
| Power supply | 230 V / 50 Hz |
| Nominal power | 1200 W |
| No-load speed | 5000 rpm |
| Blade diameter | 185 mm |
| Max. cutting depth | 65 mm (at 90°) |
| Cutting angle | 0° to 45° |
| Main functions | Straight and angled cuts in wood and derived materials |
| Safety | Blade guard, two-hand switch, electric blade brake |
| Included accessories | Saw blade, parallel guide, clamping key, dust bag |
| Maintenance and cleaning | Clean the ventilation slots and blade housing regularly; oil the moving parts |
| Spare parts and repairability | Blades, carbon brushes, switches, cables available from the manufacturer |
| General information | Domestic and semi-professional use; sound level LWA = 98 dB(A) |
Frequently Asked Questions - CA-0003A MSW
How to change the blade of the circular saw CA-0003A?
Unplug the device, lock the shaft using the provided key, loosen the center screw with the key, remove the old blade, install the new blade (respecting the rotation direction) and tighten the screw firmly.
What is the maximum cutting depth for the MSW CA-0003A?
The maximum cutting depth is 65 mm at 90° and 45 mm at 45° inclination.
Can I cut metal with this saw?
No, the MSW CA-0003A is designed for wood and derived materials (panels, chipboard). Use on metal requires an adapted blade and may damage the device.
How to adjust the angle of the sole?
Loosen the tilt locking lever, tilt the sole to the desired angle (read on the protractor), then retighten the lever.
What to do if the blade jams during cutting?
Immediately release the switch, unplug the device, remove the jammed part, check the blade condition and depth setting before resuming.
How to use the parallel guide?
Insert the guide rods into the designated slots, adjust the distance to the blade using the graduated scale, then tighten the locking knobs.
What is the power of the MSW CA-0003A?
The saw has a 1200 W motor with a no-load speed of 5000 rpm.
How to clean the saw after use?
Unplug the device, remove the blade, clean the housing and sole with a non-metallic brush, empty the dust bag and wipe external surfaces with a damp cloth.
Where to find spare parts for the CA-0003A?
Spare parts (blades, carbon brushes, switches, cables) are available from MSW via their website or an authorized dealer. Always use original parts.
How to replace the carbon brushes?
Unplug the device, unscrew the brush holder caps, remove the worn brushes, insert new ones (same size) and screw back. Excessive wear may cause sparks.
User questions about CA-0003A MSW
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual CA-0003A - MSW and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CA-0003A by MSW.
USER MANUAL CA-0003A MSW
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MSW
Model : CA-0003A
Category : Uncategorized