HPM-89CH260AERIs R32-3 - Heat pump Vivax - Free user manual and instructions
Find the device manual for free HPM-89CH260AERIs R32-3 Vivax in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Heat Pump (Split Type, Inverter) |
| Model | HPM-89CH260AERIs R32-3 |
| Brand | Vivax |
| Refrigerant | R32 |
| Cooling Capacity (Nominal) | 2.6 kW (approx.) |
| Heating Capacity (Nominal) | 2.8 kW (approx.) |
| Energy Efficiency Ratio (EER) | 3.5 (approx.) |
| Coefficient of Performance (COP) | 3.8 (approx.) |
| Power Supply | 220-240 V ~ 50 Hz |
| Indoor Unit Dimensions (WxHxD) | 800 x 290 x 210 mm (approx.) |
| Outdoor Unit Dimensions (WxHxD) | 700 x 550 x 250 mm (approx.) |
| Indoor Unit Weight | 8.5 kg (approx.) |
| Outdoor Unit Weight | 25 kg (approx.) |
| Operating Temperature Range (Cooling) | -15°C to 43°C |
| Operating Temperature Range (Heating) | -15°C to 24°C |
| Airflow Rate (Indoor) | 500 m³/h (approx.) |
| Noise Level (Indoor, Low/High) | 28 / 42 dB(A) (approx.) |
| Noise Level (Outdoor) | 52 dB(A) (approx.) |
| Key Features | Inverter compressor, self-cleaning, sleep mode, timer, remote control |
| Maintenance | Clean air filters every 2 weeks; professional service annually |
| Safety Features | Overheat protection, anti-freeze, auto restart, voltage protection |
| Repairability | Spare parts available via authorized service centers; easy access to filters |
Frequently Asked Questions - HPM-89CH260AERIs R32-3 Vivax
How do I clean the air filters?
Open the front panel, remove the filters, and wash them with lukewarm water. Allow them to dry completely before reinstalling. Clean every two weeks for optimal performance.
What does the error code 'E1' mean?
Error code E1 typically indicates a temperature sensor malfunction. Turn off the unit, wait 10 minutes, and restart. If the error persists, contact a professional technician.
Can I use the heat pump in winter?
Yes, the heat pump is designed for heating operation down to -15°C. It will automatically defrost the outdoor unit when needed.
How do I set the timer?
Press the Timer button on the remote control. Use the + and - buttons to set the desired time. Press Timer again to confirm. The unit will turn on/off at the set time.
What is the recommended room temperature for energy saving?
For cooling, set the thermostat to 24-26°C. For heating, set to 20-22°C. Each degree above or below these ranges can increase energy consumption by 6-8%.
Why is water leaking from the indoor unit?
Water leakage may be due to a clogged drain pipe or dirty air filters. Clean the filters and check the drain pipe for blockages. If the problem continues, call a technician.
How do I use the sleep mode?
Press the Sleep button on the remote. The set temperature will gradually adjust for comfortable sleep. The unit will maintain a stable temperature and reduce noise.
What type of refrigerant does this model use?
This model uses R32 refrigerant, which is more environmentally friendly than R410A and has lower global warming potential.
How often should I schedule professional maintenance?
It is recommended to have a professional service annually. They will inspect the refrigerant level, clean the coils, and check electrical connections.
Can I install the outdoor unit on a balcony?
Yes, but ensure sufficient airflow around the unit. Maintain at least 10 cm clearance on all sides. Avoid direct sunlight and rain exposure if possible.
User questions about HPM-89CH260AERIs R32-3 Vivax
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heat pump in PDF format for free! Find your manual HPM-89CH260AERIs R32-3 - Vivax and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HPM-89CH260AERIs R32-3 by Vivax.