MultiClear Set 25000 - Water filter Pontec - Free user manual and instructions
Find the device manual for free MultiClear Set 25000 Pontec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Pond water filter |
| Brand | Pontec |
| Model | MultiClear Set 25000 |
| Maximum flow rate | 25 000 l/h |
| Recommended pond volume | Up to 25 000 liters |
| Dimensions (L x W x H) | Approximately 46 x 30 x 36 cm |
| Weight | Approximately 5.5 kg |
| Power supply | 230 V ~ 50 Hz |
| Power consumption | 18 W |
| Filtration principle | Mechanical and biological |
| Filter media | Foams, biological substrate, filter pearls |
| Cleaning | Integrated backwash cleaning |
| Maintenance | Rinse foams regularly, replace substrate every 1-2 years |
| Housing material | UV-resistant plastic |
| Connections | 38 mm (1 1/2") hoses |
| Number of filter layers | 6 |
| Compliance | CE |
| Noise level | ~ 40 dB(A) |
| Permissible water temperature | +4 to +35 °C |
| Spare parts available | Yes, filter cartridges, seals, pump (optional) |
Frequently Asked Questions - MultiClear Set 25000 Pontec
How to install the Pontec MultiClear Set 25000 filter?
Place the filter outside the pond, nearby. Connect the pump to the filter inlet and the water return to the pond. Make sure the hoses are tight. Plug the pump into a protected 230V socket.
How often should the filter be cleaned?
Cleaning depends on the pond load. In general, it is recommended to rinse the foams every 2 to 4 weeks, and clean the biological substrate every 1 to 2 years.
What type of pump to use with this filter?
The pump must have a suitable flow rate, ideally between 5,000 and 10,000 l/h for optimal operation. Pontec recommends its Pontec PondoMax pump range.
Can the filter be buried?
No, the MultiClear Set 25000 is not designed to be buried. It must be placed outside the pond, on a stable and level surface.
What to do if the water flow decreases?
First check if the foams are clogged: clean them with clear water. If the problem persists, check the pump and hoses for any blockages.
How to winterize the filter?
Before winter, completely empty the filter, clean all components and store it frost-free. Do not leave residual water inside.
What filter media are included?
The set includes several filter foams (coarse, medium and fine), a ceramic biological substrate, and filter pearls. These media provide complete mechanical and biological filtration.
Is the filter compatible with a fish pond?
Yes, it is perfectly suited for ponds with fish, thanks to biological filtration that degrades organic waste. Make sure the filter capacity matches your pond volume.
How to replace the filter media?
Remove the cover, take out the foams and substrate. Replace the foams if they are torn or too dirty. The biological substrate can be rinsed in pond water to avoid destroying the bacteria.
Where can I find spare parts?
Spare parts are available from authorized Pontec dealers or on the notice-facile.com site by searching 'Pontec MultiClear 25000 parts'. You will find seals, foams, and the pre-filter cartridge.
User questions about MultiClear Set 25000 Pontec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water filter in PDF format for free! Find your manual MultiClear Set 25000 - Pontec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MultiClear Set 25000 by Pontec.
USER MANUAL MultiClear Set 25000 Pontec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Pontec
Model : MultiClear Set 25000
Category : Water filter