ALTO

Radius 100H - Microphone ALTO - Free user manual and instructions

Find the device manual for free Radius 100H ALTO in PDF.

📄 60 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice ALTO Radius 100H - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeMicrophone
BrandAlto
ModelRadius 100H
Microphone TypeDynamic
Polar PatternCardioid
Frequency Response50 Hz - 15 kHz
Impedance600 Ω
Sensitivity-54 dBV/Pa
ConnectorXLR 3-pin male
Dimensions (diameter x length)50 x 180 mm
Weight350 g
MaterialMetal and steel grille
ColorBlack
Recommended UseVocals, speech, instrument
Power SupplyNone (passive)
Included AccessoriesMicrophone clip, threaded adapter
MaintenanceClean with a soft dry cloth
CleaningDust the grille with a soft brush
SafetyDo not expose to moisture or shocks
Operating Temperature-10°C to 50°C
Warranty2 years

Frequently Asked Questions - Radius 100H ALTO

How to connect the Alto Radius 100H microphone?
Connect the male XLR cable of the microphone to a microphone input on your mixer or audio interface. Make sure the channel is properly set (gain, volume).
The microphone produces no sound, what to do?
Check the XLR cable connection, ensure the channel is enabled and the volume is sufficient. Test with another cable or input.
How to clean the Alto Radius 100H microphone?
Use a soft dry cloth for the exterior. For the grille, use a soft brush or an air blower. Avoid any liquid.
What type of cable to use?
Use a good quality male-female XLR cable. The recommended maximum length is 15 m to avoid signal loss.
Sound is low or distorted, why?
Check the gain on your mixer. Too low gain gives weak sound, too high gain causes distortion. Speak about 10-15 cm from the mic.
The mic picks up too much ambient noise, how to reduce?
The mic has a cardioid polar pattern: speak directly in front of the capsule. Move lateral sound sources away. Use a pop filter if needed.
Can I use this mic with a computer?
Yes, with an audio interface or XLR to USB adapter. Some computers have a mic jack input, but an XLR to 6.35mm jack adapter is needed.
How to maintain the mic grille?
Unscrew the grille if possible and clean it with mild soapy water, then dry it completely before reassembling. Otherwise, use a brush.
Does the mic work without power?
Yes, it is a dynamic microphone that does not require phantom power. It produces its own electrical signal.
Where to find spare parts for the Radius 100H?
Contact Alto after-sales service or an authorized dealer. Common parts like the grille or clip are available online.

User questions about Radius 100H ALTO

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Microphone in PDF format for free! Find your manual Radius 100H - ALTO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Radius 100H by ALTO.

USER MANUAL Radius 100H ALTO

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : ALTO

Model : Radius 100H

Category : Microphone