AD 935 S - Dehumidifier Dantherm - Free user manual and instructions
Find the device manual for free AD 935 S Dantherm in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Air dehumidifier |
| Brand | Dantherm |
| Model | AD 935 S |
| Dehumidification capacity | 35 liters per day (at 30°C, 80% RH) |
| Maximum air flow | 280 m³/h |
| Dimensions (W x D x H) | 400 x 400 x 620 mm |
| Net weight | 20 kg |
| Power supply | 230 V / 50 Hz |
| Power consumption | 0.45 kW |
| Refrigerant | R134a |
| Operating temperature range | 5°C to 35°C |
| Noise level | 52 dB(A) |
| Water tank | 5 liters (with automatic shut-off) |
| Continuous drainage | Possible via hose (diameter 12 mm) |
| Main functions | Dehumidification, ventilation, continuous mode, built-in hygrostat |
| Display | LED with hygrostat and timer |
| Maintenance and cleaning | Clean air filter every 2 weeks, clean tank regularly |
| Safety | Anti-frost protection, automatic shut-off when tank full, compressor protection |
| Spare parts and repairability | Filters, tank, drainage hose, electronic parts available on order |
| General information | Made in Denmark, 2-year warranty |
Frequently Asked Questions - AD 935 S Dantherm
How to clean the air filter of the Dantherm AD 935 S?
The air filter should be cleaned every two weeks. Remove the filter, wash it with warm soapy water, rinse and let dry before reinstalling.
What to do if the water tank is full?
The unit stops automatically when the tank is full. Empty the tank and replace it correctly to restart the unit.
Can I use a continuous drainage hose?
Yes, you can connect a hose (diameter 12 mm) to the drainage outlet for continuous drainage. Make sure the hose is positioned on a downward slope.
Why does the unit not start?
Check that the tank is correctly in place and that the filter is clean. If the problem persists, check the electrical connection and the fuse.
What is the ideal temperature to use the dehumidifier?
The unit operates optimally between 5°C and 35°C. Below 5°C, performance may be reduced and there is a risk of frost.
How to set the desired humidity?
Use the hygrostat adjustment button to select the desired relative humidity level (between 30% and 90%). The unit stops automatically when the level is reached.
The dehumidifier is noisy, is that normal?
A noise level of about 52 dB(A) is normal for this model. If you hear abnormal noises, check that it is level and that the filter is not clogged.
How to start continuous mode?
Continuous mode allows the unit to run without stopping until the tank is full. Press the 'Continuous' button on the remote control or control panel.
Where can I find spare parts?
Contact Dantherm customer service or visit our website to order filters, tanks, or drainage hoses.
What does error code E1 mean?
Code E1 indicates a humidity sensor problem. Turn off the unit, unplug it, and contact a qualified technician.
User questions about AD 935 S Dantherm
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dehumidifier in PDF format for free! Find your manual AD 935 S - Dantherm and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AD 935 S by Dantherm.
USER MANUAL AD 935 S Dantherm
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Dantherm
Model : AD 935 S
Category : Dehumidifier