CDT 60 - Dehumidifier Dantherm - Free user manual and instructions
Find the device manual for free CDT 60 Dantherm in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dehumidifier |
| Brand | Dantherm |
| Model | CDT 60 |
| Dehumidification Capacity | 60 L/day (at 30°C, 80% RH) |
| Air Flow | 600 m³/h |
| Power Supply | 230 V / 50 Hz |
| Power Consumption | 800 W |
| Refrigerant | R410A |
| Operating Temperature | 5 °C to 35 °C |
| Water Tank Capacity | 10 L |
| Drainage | Continuous drain via hose (included) |
| Filter | Washable dust filter |
| Dimensions (W x H x D) | 600 x 400 x 300 mm |
| Weight | 25 kg |
| Noise Level | 55 dB(A) |
| Control Type | Digital with humidistat |
| Key Features | Auto defrost, automatic restart, casters, handle |
| Maintenance | Clean filter every month; check drain hose regularly |
| Safety | Overheat protection, auto shutoff when tank full |
| Reparability | Replaceable filter, accessible internal components |
| Included Accessories | User manual, drain hose, filter |
Frequently Asked Questions - CDT 60 Dantherm
How do I set the desired humidity level?
Press the SET button until the display shows the humidity value, then use the UP/DOWN buttons to adjust between 30% and 90% relative humidity. The unit will automatically maintain the selected level.
Why is water not draining into the tank?
Ensure the drain hose is properly connected and not kinked. If using continuous drainage, verify the hose is lower than the drain outlet. Also check that the float switch is not stuck, which can prevent water collection.
How often should I clean the filter?
Clean the washable filter every two weeks under normal use. More frequent cleaning may be needed in dusty environments. A dirty filter reduces efficiency and can cause the unit to overheat.
What does the auto defrost function do?
When the dehumidifier operates in low temperatures (below 18°C), frost may form on the coils. The auto defrost cycle periodically stops the compressor and runs the fan to melt the ice, ensuring continued performance.
Can I use continuous drainage?
Yes, the CDT 60 supports continuous drainage. Connect a garden hose (not included) to the drain outlet and route it to a floor drain or sink. The water tank will be bypassed when the hose is connected.
Why is the unit making unusual noise?
Check if the unit is on a level surface and the filter is clean. Objects like coins or paper can get drawn into the air intake. If the noise persists, the compressor or fan motor may need professional inspection.
How do I reset the dehumidifier?
Unplug the unit from the power outlet for 5 minutes, then plug it back in. This resets the electronic controls. For error codes, refer to the troubleshooting section in the manual.
What is the recommended operating temperature range?
The dehumidifier operates best between 5°C and 35°C. Below 5°C, the auto defrost function activates frequently, reducing efficiency. Above 35°C, the unit may overheat and shut down.
Does the unit have a timer function?
Yes, the CDT 60 includes a delay timer. Press the TIMER button and set the desired hours (1 to 24) to automatically turn the unit on or off after the set period.
What should I do if an error code appears on the display?
Look up the code in the manual. Common codes include E1 (sensor error) and E2 (coil frost). Try unplugging the unit for 5 minutes. If the code persists, contact Dantherm support or a qualified technician.
User questions about CDT 60 Dantherm
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dehumidifier in PDF format for free! Find your manual CDT 60 - Dantherm and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CDT 60 by Dantherm.