NKV914B - Vacuum Cleaner AEG - Free user manual and instructions
Find the device manual for free NKV914B AEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Canister vacuum cleaner |
| Dimensions (L x W x H) | 260 x 310 x 420 mm |
| Weight | 6.5 kg |
| Power supply | 220-240 V, 50-60 Hz, 800 W |
| Dust bag capacity | 3.5 L dust bag |
| Filtration | Washable HEPA filter |
| Operating radius (cable) | 9 m |
| Noise level | 75 dB(A) |
| Main functions | Hard floor and carpet cleaning, electronic power adjustment, full bag indicator |
| Included accessories | Floor nozzle, crevice nozzle, furniture brush |
| Maintenance and cleaning | Clean filter every 3 months, change bag when indicator is red |
| Safety | Class II, double insulation |
| Spare parts and repairability | Bags, filters, nozzles available |
| General information | 2-year warranty |
Frequently Asked Questions - NKV914B AEG
How to change the dust bag?
Open the front compartment by pressing the button. Remove the full bag and insert a new one, making sure to secure it properly. Close the lid until you hear a click.
How often should I clean the filter?
It is recommended to clean the filter every 3 months to maintain suction performance. Wash it with lukewarm water and let it dry completely before reinstalling.
My vacuum cleaner suddenly stops, what should I do?
First check the dust bag: if full, replace it. Also inspect the filter and hoses for blockage. If the problem persists, the thermal protection may have activated; turn off the device and wait 30 minutes before restarting.
The full bag indicator lights up even though the bag is new?
This may indicate a mispositioned bag or an obstruction in the air path. Remove the bag, check that it is properly installed and that the lid is correctly closed. If the light stays on, clean the filter and ducts.
Can I use generic bags?
It is recommended to use original AEG bags to ensure optimal filtration and avoid damaging the vacuum cleaner. Generic bags may not fit properly and reduce performance.
How to disassemble the nozzle for cleaning?
Most nozzles are disassembled by pressing a button or turning a ring. Refer to the manual for the exact model. Generally, you can remove the brush and remove tangled hair or threads with scissors.
The cord does not retract fully.
Gently pull the cord to release it, then press the rewind button. If the problem persists, check that it is not twisted or obstructed. Avoid forcing to prevent damage to the mechanism.
The vacuum cleaner loses suction.
Common causes: full bag, clogged filter, or blocked hose. Check each component. If the problem persists, the power regulator may be defective; contact customer service.
Where can I buy spare parts?
AEG spare parts are available at the official AEG website or from authorized dealers. Use the model number (NKV914B) to find compatible parts.
What to do in case of overheating?
The vacuum cleaner automatically shuts off in case of overheating. Unplug the device and let it cool down for at least 30 minutes. Then check the bag and filter for any obstruction, and ensure the ventilation grilles are clean.
User questions about NKV914B AEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual NKV914B - AEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NKV914B by AEG.
USER MANUAL NKV914B AEG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AEG
Model : NKV914B
Category : Vacuum Cleaner