LS 15-22 - Uncategorized HILTI - Free user manual and instructions
Find the device manual for free LS 15-22 HILTI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rotary Leveling Laser |
| Brand | Hilti |
| Model | LS 15-22 |
| Working Range | Up to 15 m radius |
| Accuracy | ±3 mm at 10 m |
| Self-leveling | Yes, self-leveling range ±5° |
| Power Supply | Li-ion battery 3.6 V |
| Battery Life | Approximately 30 hours |
| Weight | 0.5 kg |
| Dimensions (L x W x H) | 140 x 70 x 90 mm |
| Operating Temperature | -10 °C to 50 °C |
| Laser Class | 2 (visible, < 1 mW) |
| Wavelength | 635 nm (red) |
| Mounting | Tripod or wall mount |
| Protection Rating | IP54 |
| Warranty | 2 years |
| Care and Cleaning | Clean with a soft, dry cloth |
| Safety | Do not look directly into the beam |
| Spare Parts and Repairability | Available from Hilti after-sales service |
Frequently Asked Questions - LS 15-22 HILTI
How to turn on the LS 15-22 device?
Press the power button on the top of the device. A green light indicates the device is on. If the light flashes, the battery is low.
How to change the battery of the LS 15-22?
Slide open the battery compartment at the back, remove the old battery, and insert a new compatible Hilti Li-ion battery. Close the compartment until it clicks.
What is the accuracy of the LS 15-22 laser?
The accuracy is ±3 mm at 10 m under normal conditions. It is recommended to regularly check the calibration.
Why does my LS 15-22 turn off by itself?
This may be due to a discharged battery, high temperature, or a self-leveling fault. Check the battery and ensure the device is placed on a stable surface.
How to calibrate the LS 15-22 laser?
Calibration is done automatically at startup. If you suspect an accuracy issue, consult a Hilti authorized service center.
What to do if the laser does not turn on?
Check that the battery is properly inserted and charged. If the problem persists, inspect the battery contacts and clean them if necessary. Contact customer service if nothing works.
Can I use the LS 15-22 on a tripod?
Yes, the device has a standard 5/8" or 1/4" mounting thread (depending on model) compatible with most tripods.
How to clean the LS 15-22 laser?
Use a soft, lint-free cloth to clean the housing and laser output window. Avoid solvents and never immerse the device in water.
What does a flashing display mean?
Flashing may indicate a self-leveling fault, low battery, or out-of-range temperature. Consult the manual for specific error codes.
Where to find spare parts for the LS 15-22?
Spare parts are available from the Hilti after-sales service. You can order online or visit an authorized service center.
User questions about LS 15-22 HILTI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual LS 15-22 - HILTI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LS 15-22 by HILTI.
USER MANUAL LS 15-22 HILTI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HILTI
Model : LS 15-22
Category : Uncategorized