AG 500-20D - Uncategorized HILTI - Free user manual and instructions
Find the device manual for free AG 500-20D HILTI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Angle grinder |
| Brand | Hilti |
| Model | AG 500-20D |
| Power supply | Electric, 230 V ~ 50 Hz |
| Rated power | 500 W |
| Disc diameter | 125 mm |
| No-load speed | 11,000 rpm |
| Weight (without cable) | 1.5 kg |
| Dimensions (L x W x H) | 270 x 70 x 100 mm |
| Spindle lock | Yes, for easy disc change |
| Side handle | Yes, removable (adjustable position) |
| Restart protection | Yes, after power interruption |
| Protective guard | Yes, tool-free adjustable |
| Anti-vibration system | Yes, damping handle |
| Sound pressure level | 85 dB(A) |
| Vibration level (sanding) | 7.5 m/s² |
| Maintenance | Regular cleaning of ventilation slots |
| Spare parts available | Brushes, discs, guard, handle |
| Manufacturer warranty | 2 years (subject to Hilti conditions) |
Frequently Asked Questions - AG 500-20D HILTI
How to change the disc on the Hilti AG 500-20D angle grinder?
Unplug the tool. Press the spindle lock, unscrew the clamping flange with the supplied wrench. Replace the disc, then retighten the flange and release the lock. Check that the disc rotates freely.
What is the maximum disc diameter for this grinder?
The maximum disc diameter is 125 mm. Use discs compatible with a rotational speed of at least 11,000 rpm.
Is the Hilti AG 500-20D angle grinder suitable for sanding?
Yes, it can be used for sanding with suitable abrasive discs. Use a sanding pad and a 125 mm abrasive disc.
How to clean my Hilti AG 500-20D angle grinder?
Unplug the tool. Clean the housing with a damp cloth (no solvents). Blow out the ventilation slots with compressed air to remove dust.
What to do if the grinder does not start?
First check the plug and power cable. Make sure the spindle lock is released. If the problem persists, the brushes may be worn or the disc jammed. Consult an authorized Hilti service center.
How to replace the brushes of the grinder?
Unplug the tool. Unscrew the brush holder caps on the sides of the motor. Remove the worn brushes and insert new ones in the correct orientation. Replace the caps. A run-in period of a few minutes is required.
What is the power of the Hilti AG 500-20D?
The rated power is 500 W. This power is suitable for grinding and cutting metal or masonry (with appropriate discs).
Can I use a diamond disc for cutting tiles?
Yes, with a suitable 125 mm diamond disc. Use the grinder with the protective guard and a vacuum to limit dust. Wear protective equipment.
How to adjust the side handle?
Loosen the handle knob slightly, rotate the handle to the desired position (left, right, top), then retighten firmly.
Where can I find spare parts for this grinder?
Spare parts (brushes, discs, guard, handle) are available from authorized Hilti dealers or on the official Hilti website. Always use original parts.
User questions about AG 500-20D HILTI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual AG 500-20D - HILTI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AG 500-20D by HILTI.
USER MANUAL AG 500-20D HILTI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HILTI
Model : AG 500-20D
Category : Uncategorized