TRÅDFRI 505.456.78 - Lamp IKEA - Free user manual and instructions
Find the device manual for free TRÅDFRI 505.456.78 IKEA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Connected lamp |
| Brand | IKEA |
| Model | TRÅDFRI 505.456.78 |
| Category | Lamp |
| Lighting technology | Integrated LED |
| Color temperature | Warm white to cool white (2700K - 6500K) |
| Luminous flux | 600 lumens (equivalent 40W) |
| Power supply | Mains 220-240V, 50/60 Hz |
| Dimensions (L x W x H) | 20 x 20 x 35 cm |
| Weight | 0.5 kg |
| Communications | Zigbee Light Link |
| Compatibility | IKEA Home Smart (app), Alexa, Google Assistant, Apple HomeKit |
| Main functions | Dimming, temperature adjustment, scheduling, voice control |
| Package contents | Lamp, power cable, instruction manual |
| Care and cleaning | Unplug before cleaning; use a soft, dry cloth |
| Safety | Do not immerse in water; indoor use only |
| Spare parts and repairability | Integrated non-replaceable LED bulb; repair by professional |
| Warranty | 2 years |
| General information | Requires an IKEA TRÅDFRI or DIRIGERA hub for connected control |
Frequently Asked Questions - TRÅDFRI 505.456.78 IKEA
How to connect the TRÅDFRI lamp to the IKEA Home Smart app?
Make sure the TRÅDFRI or DIRIGERA hub is turned on and connected to the network. Turn on the lamp and open the app. Follow the instructions to add a new device: the app will detect the lamp automatically.
What to do if the lamp no longer responds to commands?
First check that the lamp is powered on. Reset it by turning off the power for 5 seconds, then turning it back on. If the problem persists, reset the lamp via the app (settings > reset) or remove it from the hub and re-pair it.
Can the TRÅDFRI lamp be used without a hub?
No, the hub (TRÅDFRI or DIRIGERA) is required for control via the app or voice assistants. However, the lamp can be turned on/off manually via the wall switch, but connected functions will not be available.
How to reset the TRÅDFRI 505.456.78 lamp to factory settings?
Repeat the following operation: turn off the power for 5 seconds, turn it back on for 5 seconds, turn off again for 5 seconds, then turn it back on. The lamp will blink to confirm the reset. You will need to re-pair it to the hub.
What type of bulb is used in this lamp?
This lamp is equipped with a non-replaceable integrated LED bulb. In case of failure, the entire lamp must be replaced.
Is the TRÅDFRI lamp compatible with Apple HomeKit?
Yes, via the DIRIGERA or TRÅDFRI hub. Add the hub in the Home app, then the lamps will appear automatically. You can control the lamp with Siri.
Can the color temperature be adjusted on the lamp?
Yes, the lamp offers a range of whites from 2700K (warm white) to 6500K (cool white). Use the app or the TRÅDFRI remote to adjust.
How to install the TRÅDFRI lamp?
Place the lamp on a stable surface and plug in the power cable. Turn on the wall switch. Open the IKEA Home Smart app and follow the pairing instructions. No tools are needed.
What to do in case of a power outage?
The lamp will return to its previous state (on or off) after power is restored. If it was on, it will turn on automatically. No further action is needed.
Is the TRÅDFRI lamp energy efficient?
Yes, it uses LED technology with low power consumption (about 6 W) and long lifespan (25,000 hours). It is rated A+ for energy efficiency.
User questions about TRÅDFRI 505.456.78 IKEA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lamp in PDF format for free! Find your manual TRÅDFRI 505.456.78 - IKEA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TRÅDFRI 505.456.78 by IKEA.
USER MANUAL TRÅDFRI 505.456.78 IKEA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : IKEA
Model : TRÅDFRI 505.456.78
Category : Lamp