ROWENTA

X-Plorer Serie 75 S+ RR8585 - Vacuum Cleaner ROWENTA - Free user manual and instructions

Find the device manual for free X-Plorer Serie 75 S+ RR8585 ROWENTA in PDF.

📄 433 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice ROWENTA X-Plorer Serie 75 S+ RR8585 - page 2
2 / 433
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Robot vacuum
Brand Rowenta
Model X-Plorer Series 75 S+ RR8585
Dimensions (L x W x H) 35 x 35 x 10 cm
Weight 3.4 kg
Power supply Rechargeable lithium-ion battery
Rated voltage 14.4 V
Runtime Up to 120 minutes
Charging time Approximately 4 hours
Dustbin capacity 300 ml
Filtration Washable HEPA filter
Noise level 60 dB
Main functions Suction, sweeping, laser navigation, mapping, obstacle detection, scheduling, voice control
Cleaning modes Auto, zone, spot, edge, scheduled
Connectivity Wi-Fi, Rowenta mobile app
Sensors Laser, gyroscope, bump sensors, cliff sensors
Maintenance and cleaning Empty the dustbin after each use, clean the brushes and filters regularly
Safety Cliff detection, automatic stop if lifted, secure battery
Spare parts and repairability Side brushes, HEPA filter, battery, dustbin available online
Warranty 2 years

Frequently Asked Questions - X-Plorer Serie 75 S+ RR8585 ROWENTA

How to start the Rowenta X-Plorer Series 75 S+ robot vacuum?
Press the Start button on the robot or use the mobile app. Make sure the battery is charged.
How to schedule a cleaning session?
In the Rowenta app, go to Scheduling and set the desired days and times. The robot will start automatically.
What to do if the robot does not connect to Wi-Fi?
Check that your Wi-Fi network is 2.4 GHz and the password is correct. Reset the robot by holding the Reset button for 3 seconds.
How to empty the dustbin?
Open the robot's cover, remove the dustbin, empty it into a trash can, and replace it. Clean the filter if necessary.
How often should the brushes be cleaned?
It is recommended to clean the side brushes and the main brush every two weeks to maintain optimal performance.
Does the robot fall down stairs?
No, it is equipped with cliff sensors that prevent it from falling. It automatically stops at edges.
How to recharge the battery?
The robot automatically returns to its docking station when the battery is low. You can also manually place it on the station.
Can I use the robot on carpet?
Yes, the robot is designed for all hard floors and short-pile carpets. It automatically adapts its suction power.
How to reset the robot?
Hold the Reset button (under the cover) for 5 seconds until the indicator flashes. Release and wait for the restart.
Where to find spare parts for the Rowenta X-Plorer Series 75 S+?
Spare parts are available on the Rowenta website or from authorized dealers. Use the reference RR8585 to search.

User questions about X-Plorer Serie 75 S+ RR8585 ROWENTA

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual X-Plorer Serie 75 S+ RR8585 - ROWENTA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. X-Plorer Serie 75 S+ RR8585 by ROWENTA.

USER MANUAL X-Plorer Serie 75 S+ RR8585 ROWENTA

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : ROWENTA

Model : X-Plorer Serie 75 S+ RR8585

Category : Vacuum Cleaner