ROWENTA

X-Plorer Serie 135 Plus RR91D5 - Vacuum Cleaner ROWENTA - Free user manual and instructions

Find the device manual for free X-Plorer Serie 135 Plus RR91D5 ROWENTA in PDF.

📄 128 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice ROWENTA X-Plorer Serie 135 Plus RR91D5 - page 7
7 / 128
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Robot vacuum
Dimensions (diameter x height) 35 x 7.6 cm
Weight 2.9 kg
Power supply Li-Ion battery 14.4 V 2600 mAh
Runtime Up to 120 minutes
Charging time About 4 hours
Dust bin capacity 400 ml
Main brush Rubber center brush
Filtration High-efficiency HEPA filter
Noise level 65 dB (A)
Navigation functions Laser sensors, gyroscope, obstacle detection
Programming Rowenta mobile app, weekly scheduling
Cleaning modes Auto, spot, edge, scheduled
Carpet detection Automatic power boost
Anti-drop sensors Yes, 3 infrared sensors
Virtual barrier Yes, via app
Maintenance Empty bin, clean filter and brush
Available spare parts HEPA filters, side brushes, battery, dust bin
Warranty 2 years
Repairability index 8.1/10

Frequently Asked Questions - X-Plorer Serie 135 Plus RR91D5 ROWENTA

How to start and stop the Rowenta X-Plorer Serie 135 Plus?
To start, press the Start/Pause button on the device or via the Rowenta mobile app. To stop, press and hold the same button or use the app.
How to empty the dust bin?
Open the top cover of the vacuum, remove the dust bin by pulling the handle, empty it into a trash can, then replace it until it clicks.
How to clean the HEPA filter?
Remove the HEPA filter located behind the dust bin. Tap it gently to remove dust. Do not wash with water. Replace every 3 months.
Why is my vacuum not charging?
Check that the charging station is plugged in and that the contacts on the device and station are clean. Try moving the station against a wall.
How to schedule a daily cleaning?
Download the Rowenta app, connect the vacuum to your Wi-Fi network, then in the 'Schedule' tab, set the desired days and times.
What to do if the vacuum gets stuck on a carpet?
The 'Carpet' mode automatically boosts power. If the problem persists, remove obstacles or use the virtual barrier in the app to exclude the area.
How to reset the Wi-Fi on the device?
Press and hold the Home and Start/Pause buttons simultaneously for 5 seconds until you hear a beep. Then follow the instructions in the app.
What are common error codes?
Error E1: brush jammed. Error E2: drop sensor obstructed. Clean the sensors or remove obstructions. See the manual for a full list.
Can I use the vacuum without the app?
Yes, basic functions (start, stop, return to base) are accessible via buttons on the device. The app enables scheduling and advanced settings.
How to replace the battery?
The battery is built-in. To replace it, contact Rowenta after-sales service or an authorized technician. Do not attempt to open it yourself.

User questions about X-Plorer Serie 135 Plus RR91D5 ROWENTA

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual X-Plorer Serie 135 Plus RR91D5 - ROWENTA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. X-Plorer Serie 135 Plus RR91D5 by ROWENTA.

USER MANUAL X-Plorer Serie 135 Plus RR91D5 ROWENTA

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : ROWENTA

Model : X-Plorer Serie 135 Plus RR91D5

Category : Vacuum Cleaner