DE9135 - Uncategorized DEWALT - Free user manual and instructions
Find the device manual for free DE9135 DEWALT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Battery charger |
| Brand | DeWalt |
| Model | DE9135 |
| Dimensions (L x W x H) | 20 x 15 x 10 cm |
| Weight | 0.5 kg |
| Input | 120-240 V AC, 50/60 Hz |
| Output voltage | 12 V / 20 V MAX |
| Charge current | 4 A |
| Main functions | Fast charging, battery detection, overcharge and short-circuit protection, automatic shutdown at end of charge |
| LED indicators | Charge status, battery fault, power |
| Battery compatibility | DeWalt 12V and 20V MAX (XR, DCB, etc.) |
| Operating temperature | 0 °C to 40 °C |
| Maintenance and cleaning | Use a dry cloth, do not expose to moisture, unplug before cleaning |
| Safety | Thermal protection, reverse polarity protection, internal fuse |
| Spare parts and repairability | Removable power cable, replacement fuse available |
| General information | Compact wall charger, compatible with DeWalt range, ideal for job sites |
Frequently Asked Questions - DE9135 DEWALT
How to charge a battery with the DE9135?
Plug the charger into a wall outlet, insert the battery until it clicks. The LED lights up to indicate charging start.
What types of batteries are compatible?
The DE9135 is compatible with DeWalt 12V and 20V MAX batteries (XR, DCB, etc.).
How long does it take to charge a battery?
Charging time varies by capacity. For a 20V 5Ah battery, allow about 1.5 hours with the 4A current.
What do the LED indicators mean?
Solid green LED: battery charged. Flashing green LED: charging. Red LED: error or battery too hot/cold.
Can I leave the battery on the charger?
Yes, the charger automatically switches to maintenance mode after charging. It is safe to leave the battery plugged in.
Is it normal for the charger to get hot?
Yes, slight heat is normal during charging. In case of overheating, the protection circuit cuts off power.
How to clean the charger?
Unplug the charger, wipe it with a dry cloth. Do not use water or solvent.
Is the charger protected against short circuits?
Yes, it has output short-circuit protection and an internal fuse.
Can I use an extension cord?
Yes, use a cord in good condition, with sufficient gauge (min. 1.5 mm²) and rated for outdoor use if necessary.
Where can I find spare parts?
The power cable and fuse are available at authorized DeWalt dealers or online.
User questions about DE9135 DEWALT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DE9135 - DEWALT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DE9135 by DEWALT.
USER MANUAL DE9135 DEWALT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DEWALT
Model : DE9135
Category : Uncategorized